gain 4 the dragonfly i need help
#1
Junior Member
Thread Starter
Join Date: Feb 2004
Location: sacramento, CA
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
![Default](images/icons/icon1.gif)
hello i have the feda dragonfly with the gws controller, and the gws gyro and was wondering the best way to adgust the gain and the setupon the gyro.the model is pg-03.[img][img][/img]
#2
Junior Member
Join Date: Mar 2004
Location: Benowa WatersQueensland, AUSTRALIA
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
![Default](images/icons/icon1.gif)
HI, Im not Sure if u know but the Gyro/ mixer/ speed controller shoul be mounted horizontlly with so u can read the GWS correctly. or u will not get the correct opperation. U should start with both set to 0 and adjust them according to the responnse that u want the heli to have.
HOpe this helps
Jai
HOpe this helps
Jai
#3
Member
Join Date: Jan 2004
Location: balikpapankaltim, INDONESIA
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
![Default](images/icons/icon1.gif)
find the spot where the gain is neutral. it means when you're flying it, the heli won't turn clockwise/counterclockwise (relatively neutral). the neutral spot will be a variable, meaning at different speeds, height, conditions... your heli won't stay always neutral... at least it will be close to neutral... so find the best spot that suits you best....
the setup will affect how much control you want over the amount of changes you put to the tail motor. some people want a very responsive tail and some want a more relaxed response... u can change it there
the most totally neutral spot will be shown by the leds response... if it's neutral... the led will light up orange (or a combination of red and green/ or a flashing of red and green)....
hope i didn't get it mixed up between the gain and setup..... hope this helps a bit.... for others... correct me if i'm wrong...
the setup will affect how much control you want over the amount of changes you put to the tail motor. some people want a very responsive tail and some want a more relaxed response... u can change it there
the most totally neutral spot will be shown by the leds response... if it's neutral... the led will light up orange (or a combination of red and green/ or a flashing of red and green)....
hope i didn't get it mixed up between the gain and setup..... hope this helps a bit.... for others... correct me if i'm wrong...
#7
Senior Member
Join Date: Jan 2004
Location: Columbia Heights, MN
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
![Default](images/icons/icon1.gif)
mine comes that way as well on my DF. I do notice that the gyro senses forward/aft movements also!
But I have not tried FFF to see what effects this does...
The setup dial shoudl be in the middle(tune it so that both red and green LED are on). This dictates that the gyro is not changing the rudder signals(neutral setup position).
As for gain dial, this is a user preference. I have mine about 70% clockwise.
But I have not tried FFF to see what effects this does...
The setup dial shoudl be in the middle(tune it so that both red and green LED are on). This dictates that the gyro is not changing the rudder signals(neutral setup position).
As for gain dial, this is a user preference. I have mine about 70% clockwise.