Vacuum Forming Question
#1
Member
Thread Starter
Join Date: Jan 2003
Location: Grove City,
PA
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Vacuum Forming Question
Can anyone steer me in the right direction? I have a Twinstar (which I love) and because they are not being manufactured any more, I would like to be able to vacuum form the plastic parts for replacement when they finally crack from vibration and use. I have already made molds of the wingtips and nacelle covers.
I borrowed a vacuum former from a friend who has never used it, but I'm not sure of what kind of plastic sheeting to use nor where to get it. My friend doesn't know the answer to this question either, so I'm addressing it here.
I have heard the word coroplast, but don't know what that is.
Can anyone give me any advice on the best plastic to use and where to get it?
Thanks
Roodester
I borrowed a vacuum former from a friend who has never used it, but I'm not sure of what kind of plastic sheeting to use nor where to get it. My friend doesn't know the answer to this question either, so I'm addressing it here.
I have heard the word coroplast, but don't know what that is.
Can anyone give me any advice on the best plastic to use and where to get it?
Thanks
Roodester
#2
Junior Member
Join Date: Jan 2003
Location: MA
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Vacuum Forming Question
Squadron Mail Order in Carrollton,Texas - www.squadron.com. They are a mail order company that specializes in Plastic scale model airplane kits. They sell 5x8" sheets of white styreen plastic in thicknesses of .010,.020,.030,.040,.050 and I believe .060. Their prices are pretty reasonable. Good luck.
#3
Senior Member
Join Date: Jun 2002
Location: MD
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
Vacuum Forming Question
Corroplast looks just like cardboard made out of plastic. It's usually white and frequently used in signs. (Take a close look at some of those campaign signs next time there's an election)
You can make tails, wings, and even entire planes (SPADs - not the WWI sort) out of it. Unfortunately it isn't well suited to complicated curves (it only bends well in one direction), probably can't be vacuum formed, and is rather thick and heavy for the parts you're making.
You can make tails, wings, and even entire planes (SPADs - not the WWI sort) out of it. Unfortunately it isn't well suited to complicated curves (it only bends well in one direction), probably can't be vacuum formed, and is rather thick and heavy for the parts you're making.
#4
Banned
Vacuum Forming Question
First make plaster of paris molds of all of the plastic parts that you want to reproduce.
Then, any plastics house can sell you "high impact styrene" in what ever thickness you want. About $7.00 for a 4' x 8' sheet. The thickness will depend on how much vacuum you can pull.
Les
Then, any plastics house can sell you "high impact styrene" in what ever thickness you want. About $7.00 for a 4' x 8' sheet. The thickness will depend on how much vacuum you can pull.
Les
#5
Senior Member
My Feedback: (1)
Join Date: Feb 2003
Location: Payson,
AZ
Posts: 2,141
Likes: 0
Received 0 Likes
on
0 Posts
Vacuum Forming Question
Micro Mark catalog lists several sizes, types and thicknessesin their catalog. Try www.micromark.com