anyone know this answer speed control w/brake?
#1
Senior Member
Thread Starter
My Feedback: (2)
Join Date: Feb 2004
Location: Moira, NY
Posts: 1,139
Likes: 0
Received 0 Likes
on
0 Posts
anyone know this answer speed control w/brake?
wich is better....with a brake or no brake GWS GS-100E Speed Controller 5-Amp thanx
it also says.. 5g / 0.17 oz, Brake, Auto-Cutoff, BEC, Reset, 5-Amp, 3 - 8 cells (3.6V - 9.6V will the 2cell thunderpack work?
also negative shift tx or positive?
it also says.. 5g / 0.17 oz, Brake, Auto-Cutoff, BEC, Reset, 5-Amp, 3 - 8 cells (3.6V - 9.6V will the 2cell thunderpack work?
also negative shift tx or positive?
#2
Senior Member
Join Date: Mar 2004
Location: MelbourneVictoria, AUSTRALIA
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
RE: anyone know this answer speed control w/brake?
You dont need a brake for chopper - this is only used to lock motor for foldback prop on aircraft.
In fact I left my brake on by accident and ground 2 teeth off the tail gear (zoom400) when it came to a complete stop from high rpm. Not Good !!
In fact I left my brake on by accident and ground 2 teeth off the tail gear (zoom400) when it came to a complete stop from high rpm. Not Good !!
#4
Senior Member
Join Date: Mar 2004
Location: MelbourneVictoria, AUSTRALIA
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
RE: anyone know this answer speed control w/brake?
If you are planning to go seperates you will need a special esc that can also mix the tail otherwise you will need 2 esc's. + gyro + etc...
If you plan to put in more powerful motor you should go for 8-10amps to minimise chance of burnout...
If you plan to put in more powerful motor you should go for 8-10amps to minimise chance of burnout...
#5
Senior Member
Thread Starter
My Feedback: (2)
Join Date: Feb 2004
Location: Moira, NY
Posts: 1,139
Likes: 0
Received 0 Likes
on
0 Posts
RE: anyone know this answer speed control w/brake?
I am actually going to go with this setup.
johnson 250 main
dd tail
the pixi 7p for the tail esc
pixi 20p for main motor
6channel reciever
the litened ver. heading hold gyro
and lithium thunderpack 1300mah
hope it works out good for me....any opinions on this would be appretiated. Im looking for better stability.
johnson 250 main
dd tail
the pixi 7p for the tail esc
pixi 20p for main motor
6channel reciever
the litened ver. heading hold gyro
and lithium thunderpack 1300mah
hope it works out good for me....any opinions on this would be appretiated. Im looking for better stability.
#6
Senior Member
Join Date: Mar 2004
Location: MelbourneVictoria, AUSTRALIA
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
RE: anyone know this answer speed control w/brake?
Wow you are spending some serious $$$ I assume you have a heli radio to control it all. In that case why dont you spend an extra $200 and get the zoom400. It is far more advanced and does not suffer from all the fixed pitch related problems... It can also do inverted and all that stuff!
you will only need a single 22-30amp esc and pg03 gyro. you can pick up some cheap gws servos and you are set !!
you will only need a single 22-30amp esc and pg03 gyro. you can pick up some cheap gws servos and you are set !!
#7
RE: anyone know this answer speed control w/brake?
hey justin_92_92
something to think about when choosing a tail esc, is that tail motors will last longer with a high frequency esc. look into slim105he and trec. these are the 2 highly recommended tail escs on the market. btw, i went with the slim105he
something to think about when choosing a tail esc, is that tail motors will last longer with a high frequency esc. look into slim105he and trec. these are the 2 highly recommended tail escs on the market. btw, i went with the slim105he
#8
Senior Member
Thread Starter
My Feedback: (2)
Join Date: Feb 2004
Location: Moira, NY
Posts: 1,139
Likes: 0
Received 0 Likes
on
0 Posts
RE: anyone know this answer speed control w/brake?
thanx guys...any input is very great to hear. I am still learning how to fly this bad boy so I dont think I should get a cp yet. I will upgrade this one to cp if I ever feel the need for that kind of flight. I cant handle fp yet so I think I should stick with this for a while.
I cant find the slim anywhere. And I would kinda like to get them most from the same place but as far as now.
MY lipos, charger, reciever and hh gyro will come from hellihobby
My pixi7p and if i go with pixi 20p will come from hobby horse
the tx will come from all e rc and the crystal will be from any one of those. I believe thats all I need.
oh and Like90 blades will be added for the last step.
I just want this thing easy to fly.
I cant find the slim anywhere. And I would kinda like to get them most from the same place but as far as now.
MY lipos, charger, reciever and hh gyro will come from hellihobby
My pixi7p and if i go with pixi 20p will come from hobby horse
the tx will come from all e rc and the crystal will be from any one of those. I believe thats all I need.
oh and Like90 blades will be added for the last step.
I just want this thing easy to fly.