DA-50 on can in WH Edge??
#1
Senior Member
Thread Starter
My Feedback: (24)
Join Date: Jan 2003
Location: Harriman,
TN
Posts: 321
Likes: 0
Received 0 Likes
on
0 Posts
DA-50 on can in WH Edge??
Hi guys trying to find out some info for a friend.
Have any of you set up the Edge with a DA-50 with a header and can?
If so what can and header are you using and was their much modifying that had to be done?
Pictures of a setup would be great!
Thanks
Have any of you set up the Edge with a DA-50 with a header and can?
If so what can and header are you using and was their much modifying that had to be done?
Pictures of a setup would be great!
Thanks
#2
Member
Join Date: Oct 2002
Location: Oslo, NORWAY
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
RE: DA-50 on can in WH Edge??
I've got one, DA50 with a canister from MTW: [link=http://www.mtw-silencer.com/html/hauptteil_schalldampfer.html#standard]www.mtw-silencer.com/[/link] and made the exhaust manifold from stainless steel tubing, also from MTW. The manifold came in part that was silver-soldered togehter. Piece of cake, that operation.
I had to chop out part of some of the fueslage bulkheads in order to make it fit.
According to MTW, DA is their distributor in the US.
I'll try to get you some photos.
I had to chop out part of some of the fueslage bulkheads in order to make it fit.
According to MTW, DA is their distributor in the US.
I'll try to get you some photos.
#4
Senior Member
My Feedback: (17)
Join Date: Jul 2003
Location: Boisbriand,
QC, CANADA
Posts: 1,592
Likes: 0
Received 0 Likes
on
0 Posts
RE: DA-50 on can in WH Edge??
Hello Kjell!
Could you post a few tach reading of your DA-50 cannister set-up please? I am curious to see what you can get with 23x8, 22x10 or 23x10prop
Could you post a few tach reading of your DA-50 cannister set-up please? I am curious to see what you can get with 23x8, 22x10 or 23x10prop
#6
Senior Member
My Feedback: (17)
Join Date: Jul 2003
Location: Boisbriand,
QC, CANADA
Posts: 1,592
Likes: 0
Received 0 Likes
on
0 Posts
RE: DA-50 on can in WH Edge??
Thank you
Based on your tach reading, MTW cannister is not 'tune cannister'. There is no RPM gain with this canister except the noise reduction.
Does tune canister exist or is there another alternative to the long tune pipe to get more power from DA-50?
Daniel
Based on your tach reading, MTW cannister is not 'tune cannister'. There is no RPM gain with this canister except the noise reduction.
Does tune canister exist or is there another alternative to the long tune pipe to get more power from DA-50?
Daniel
#7
Member
Join Date: Oct 2002
Location: Oslo, NORWAY
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
RE: DA-50 on can in WH Edge??
ORIGINAL: There is no RPM gain with this canister except the noise reduction.
Does tune canister exist or is there another alternative to the long tune pipe to get more power from DA-50?
Daniel
Does tune canister exist or is there another alternative to the long tune pipe to get more power from DA-50?
Daniel
But I would say that the main purpose is noise reduction. This is more important than more rpm's.
Btw, more power from DA50?
It has already "sufficient" power, as they used to answer if you asked how much power a Rolls Royce car had.