cf gear for h9 330L delaminates
#1
Junior Member
Thread Starter
My Feedback: (2)
Join Date: Jun 2004
Location: ventura,
CA
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
cf gear for h9 330L delaminates
i have a h9 330L and ive bought 2 sets of cf gear for it from TNT.
both sets have delaminated. is there a better place to buy cf gear for a h9 330L
both sets have delaminated. is there a better place to buy cf gear for a h9 330L
#2
Senior Member
My Feedback: (5)
Join Date: Jan 2002
Location: Piqua,
OH
Posts: 1,028
Likes: 0
Received 0 Likes
on
0 Posts
RE: cf gear for h9 330L delaminates
Nope, one company makes them all. The problem is the layup and the resin they use. But to their defence, the way they do it is the only way that you can make money on composite gear. It would be far to labor intensive and costly to make proper composite gear. Gear would cost around $160 to $250 instead of what they are now.
The work around is to wrap the upper part of the leg, at the bend were it mounts to the fuse, with Kevlar tow (a thick thread) and CA it. Tow, especially Kevlar, is hard to wet out, so the CA does a good job of penatration.
Our gear has lasted a few years after we came up with fix.
Good luck!
The work around is to wrap the upper part of the leg, at the bend were it mounts to the fuse, with Kevlar tow (a thick thread) and CA it. Tow, especially Kevlar, is hard to wet out, so the CA does a good job of penatration.
Our gear has lasted a few years after we came up with fix.
Good luck!