FMS Models won't load
#1
Member
Thread Starter
Join Date: Sep 2004
Location: Hillsborough, NJ
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
FMS Models won't load
I loaded FMS version 2.0 8 connected an old Futaba Tx with a serial cable and all the models that come with it load and fly. Any model I download from any site won't load, giving me "Error in <model>.PAR Invalid version information"
Any ideas?
Any ideas?
#3
Member
Thread Starter
Join Date: Sep 2004
Location: Hillsborough, NJ
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
RE: FMS Models won't load
ORIGINAL: Ken Morano
I'm no expert on FMS but.....
Are you using version 8.3 of FMS? It's supposed to be more tolerant of older model par files than 8.2.
I'm no expert on FMS but.....
Are you using version 8.3 of FMS? It's supposed to be more tolerant of older model par files than 8.2.
Wow Ken, you've been a big help today. I upgraded to 8.3 and all the models load.
If I can just get past that Interlink issue I'll be doing great. This old 4C AM Futaba Tx is not really worknig well but it's all I have with a buddy box connector.
#4
Member
Join Date: Aug 2002
Location: Everett,
WA,
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
RE: FMS Models won't load
Whoa whoa, is your controller problem (referenced in another thread) involved with using a REAL R/C transmitter or are you trying to use a Great Plains Realflight interlink controller?
Take any advice I've given you regarding controllers with a grain of salt - I had assumed you were trying to get the Realflight interlink controller to work with FMS.
Take any advice I've given you regarding controllers with a grain of salt - I had assumed you were trying to get the Realflight interlink controller to work with FMS.