Replacing spur gear
05-09-2005, 06:07 PM
#1
Junior Member
Thread Starter
Join Date: Jan 2005
Location: Union, ME
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Replacing spur gear
Question for all of you Savage gurus,
What has to be moved/removed in order to replace the plastic spur gear on the SAvage 25?
Yleefox
What has to be moved/removed in order to replace the plastic spur gear on the SAvage 25?
Yleefox
05-09-2005, 06:46 PM
#3
Senior Member
Join Date: Apr 2005
Location: Pompano Beach
Posts: 988
Likes: 0
Received 0 Likes
on
0 Posts
RE: Replacing spur gear
I remember I had to put on the "ss" spurgear that came with the 4.6 kit and there was like a washer, spring and bolt in front of it. Cant you just remove the bolt and the spring and slide the spur gear off?
05-10-2005, 06:41 AM
#5
Senior Member
Join Date: Mar 2005
Location: snellville, GA
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
RE: Replacing spur gear
just had to replace mine. that diagram shows it all. to set the mesh, most people recomended putting a single piece of paper inbetween the gears and tighteninghte engine down. then pull the paper out.
05-11-2005, 09:53 AM
#6
Junior Member
Join Date: Jan 2005
Location: , MS
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
RE: Replacing spur gear
ORIGINAL: ntloser
I remember I had to put on the "ss" spurgear that came with the 4.6 kit and there was like a washer, spring and bolt in front of it. Cant you just remove the bolt and the spring and slide the spur gear off?
I remember I had to put on the "ss" spurgear that came with the 4.6 kit and there was like a washer, spring and bolt in front of it. Cant you just remove the bolt and the spring and slide the spur gear off?
05-11-2005, 10:33 AM
#7
My Feedback: (2)
Join Date: Feb 2005
Location: Jacksonville, FL
Posts: 3,094
Likes: 0
Received 0 Likes
on
0 Posts
RE: Replacing spur gear
That spur gear just won't come off with that pesky clutchbell in the way! Engine removal (Or transmission removal if you are really, REALLY bored) is the only way. 
05-15-2005, 06:44 PM
#11
Senior Member
Join Date: Jan 2005
Location: Clovervill,
MI
Posts: 909
Likes: 0
Received 0 Likes
on
0 Posts
RE: Replacing spur gear
ORIGINAL: savageman90
yah.... major, also the 4 gear diff mod is a bi*ch too
yah.... major, also the 4 gear diff mod is a bi*ch too
but yea the motor has to come out to change the spur, just one more up side to running an alloy one.
