taking of slow
05-15-2005, 06:59 PM
#3
Senior Member
Join Date: Jan 2005
Location: Clovervill,
MI
Posts: 909
Likes: 0
Received 0 Likes
on
0 Posts
RE: taking of slow
Make sure your slipper is set right, tight then back out 1/8-1/4 turn. feel your clutch bell after a run to see if its real hot. you might have to go to aluminum shoes, I got a set of Mugens coming.[8D]
If all that good then lower your lsn a tad and see.
If all that good then lower your lsn a tad and see.
05-15-2005, 08:42 PM
#4
Junior Member
Join Date: Dec 2003
Location: Chicago, IL
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
RE: taking of slow
instead of just seeing if the clutch bell is hot, take of the clucth bell and take a look at the shoes. if thier a bit glazed, then give them a good scuffin with some fine grit sand paper.
but also, just saying thata its slow on take off, doesnt give enough info.
does the truck stall, bog, make any weird noises, what?
we need mroe info if you want good answers.
but also, just saying thata its slow on take off, doesnt give enough info.
does the truck stall, bog, make any weird noises, what?
we need mroe info if you want good answers.
