Does HPI make a roto start plate for my OS .18 CV-RX engine?
#1
Thread Starter
My Feedback: (45)
Join Date: Mar 2005
Location: Tucker,
GA
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
Does HPI make a roto start plate for my OS .18 CV-RX engine?
I have this engine. Is there a roto start back plate for it? thanks [link=http://www2.towerhobbies.com/cgi-bin/WTI0001P?&I=LXGGP6&P=V]Link[/link]
#3
Senior Member
My Feedback: (1)
Join Date: Aug 2004
Location: Syracuse,
UT
Posts: 2,216
Likes: 0
Received 0 Likes
on
0 Posts
RE: Does HPI make a roto start plate for my OS .18 CV-RX engine?
ORIGINAL: Bmr4life
I have this engine. Is there a roto start back plate for it? thanks [link=http://www2.towerhobbies.com/cgi-bin/WTI0001P?&I=LXGGP6&P=V]Link[/link]
I have this engine. Is there a roto start back plate for it? thanks [link=http://www2.towerhobbies.com/cgi-bin/WTI0001P?&I=LXGGP6&P=V]Link[/link]
No HPI doesn't make one but the duratrax one will work with a HPI rotostart..just buy the backplate, and gears and your set.
[link=http://www2.towerhobbies.com/cgi-bin/WTI0001P?&I=LXHPT2]one part[/link]
[link=http://www2.towerhobbies.com/cgi-bin/WTI0001P?&I=LXHPS8]second part[/link]
[link=http://www2.towerhobbies.com/cgi-bin/WTI0001P?&I=LXJBC3]third part[/link]
#4
Thread Starter
My Feedback: (45)
Join Date: Mar 2005
Location: Tucker,
GA
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
RE: Does HPI make a roto start plate for my OS .18 CV-RX engine?
ORIGINAL: badz
No HPI doesn't make one but the duratrax one will work with a HPI rotostart..just buy the backplate, and gears and your set.
[link=http://www2.towerhobbies.com/cgi-bin/WTI0001P?&I=LXHPT2]one part[/link]
[link=http://www2.towerhobbies.com/cgi-bin/WTI0001P?&I=LXHPS8]second part[/link]
[link=http://www2.towerhobbies.com/cgi-bin/WTI0001P?&I=LXJBC3]third part[/link]
ORIGINAL: Bmr4life
I have this engine. Is there a roto start back plate for it? thanks [link=http://www2.towerhobbies.com/cgi-bin/WTI0001P?&I=LXGGP6&P=V]Link[/link]
I have this engine. Is there a roto start back plate for it? thanks [link=http://www2.towerhobbies.com/cgi-bin/WTI0001P?&I=LXGGP6&P=V]Link[/link]
No HPI doesn't make one but the duratrax one will work with a HPI rotostart..just buy the backplate, and gears and your set.
[link=http://www2.towerhobbies.com/cgi-bin/WTI0001P?&I=LXHPT2]one part[/link]
[link=http://www2.towerhobbies.com/cgi-bin/WTI0001P?&I=LXHPS8]second part[/link]
[link=http://www2.towerhobbies.com/cgi-bin/WTI0001P?&I=LXJBC3]third part[/link]
#5
Senior Member
My Feedback: (1)
Join Date: Aug 2004
Location: Syracuse,
UT
Posts: 2,216
Likes: 0
Received 0 Likes
on
0 Posts
RE: Does HPI make a roto start plate for my OS .18 CV-RX engine?
Yup you sure can but I see towers great store has them on backorder....ya might have luck thru a lhs but I'm not sure there since most durtrax items are controlled by tower since they own it.
#6
Senior Member
Join Date: Feb 2004
Location: Dayton,
OH,
Posts: 959
Likes: 0
Received 0 Likes
on
0 Posts
RE: Does HPI make a roto start plate for my OS .18 CV-RX engine?
Bmr4life:
Take a drill and a drill bit one size larger and ease the holes - the standard rotostart will fit right on - no new parts needed.
Gran
Take a drill and a drill bit one size larger and ease the holes - the standard rotostart will fit right on - no new parts needed.
Gran
#7
Thread Starter
My Feedback: (45)
Join Date: Mar 2005
Location: Tucker,
GA
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
RE: Does HPI make a roto start plate for my OS .18 CV-RX engine?
ORIGINAL: Grantothismo
Bmr4life:
Take a drill and a drill bit one size larger and ease the holes - the standard rotostart will fit right on - no new parts needed.
Gran
Bmr4life:
Take a drill and a drill bit one size larger and ease the holes - the standard rotostart will fit right on - no new parts needed.
Gran
#8
Junior Member
Join Date: Feb 2005
Location: San Marcos,
TX
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
RE: Does HPI make a roto start plate for my OS .18 CV-RX engine?
I put my rotostart off of my nitro star 15ss engine on my O.S 18 CV-RX.
But I had to do a little drilling :-), heh works perfect!
But I had to do a little drilling :-), heh works perfect!
#9
Senior Member
Join Date: Feb 2004
Location: Dayton,
OH,
Posts: 959
Likes: 0
Received 0 Likes
on
0 Posts
RE: Does HPI make a roto start plate for my OS .18 CV-RX engine?
Bmr4life:
Yes, that one - not the one for the Savage engines. Jort88 has the idea, just make the holes a little bigger and it will bolt right on.
Yes, that one - not the one for the Savage engines. Jort88 has the idea, just make the holes a little bigger and it will bolt right on.