Airframe ideas needed for Wren turboprop.
#26
My Feedback: (39)
Join Date: Jan 2003
Location: Decatur, IN
Posts: 1,284
Likes: 0
Received 0 Likes
on
0 Posts
RE: Airframe ideas needed for Wren turboprop.
Video of my Wren powered Carden turboprop is now at:
http://rcairgallery.com
enjoy.
Best regards,
Ron Ballard
http://rcairgallery.com
enjoy.
Best regards,
Ron Ballard
#29
RE: Airframe ideas needed for Wren turboprop.
There may be a large PC-9 being developed over here in Aus. Suit Wren turbo prop. Been on the drawing board for probably 2 years. No more information is known as yet. maybe look out for this one in the next year or so, i believe it will happen juts is a matter of time to produce, test and then kit something of this size.
Would be a very nice choice as per Maverick's suggestion.
Cheers
Would be a very nice choice as per Maverick's suggestion.
Cheers
#30
My Feedback: (2)
RE: Airframe ideas needed for Wren turboprop.
Well, if you had ANOTHER Wren TP, I could supply you with this ! 18% Exact scale of the Beechcraft Starship-2000A.
Specs: 114" W.S.. 8'-5" Lg. 14 sq. ft of wing area, fully funtional and coupled Fowler Flap and mechanically sweeping Canard.
Just food for thought.
Specs: 114" W.S.. 8'-5" Lg. 14 sq. ft of wing area, fully funtional and coupled Fowler Flap and mechanically sweeping Canard.
Just food for thought.
#31
My Feedback: (14)
RE: Airframe ideas needed for Wren turboprop.
You cab try MR AERODESING. http://www.mraerodesign.com/pc6/PC6.html They desing a pilatus pc6 from real scale aiecraft. It have 120" win span.
#34
Senior Member
My Feedback: (13)
Join Date: Apr 2002
Location: Marco Island,
FL
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
RE: Airframe ideas needed for Wren turboprop.
There are enough P-51's too. This is the next project:
here it is for shure in white
[link=http://www.jets.at/images/gallery/tucano_new/index.htm]TUCANO GALLERY[/link]
#35
My Feedback: (39)
Join Date: Jan 2003
Location: Decatur, IN
Posts: 1,284
Likes: 0
Received 0 Likes
on
0 Posts
RE: Airframe ideas needed for Wren turboprop.
Mike,
The building board is cleaned off and I am waiting patiently. I have a second Wren Turboprop ordered and Roger has agreed to install smoke fittings on the exhaust.
I will start a new build (finish) thread once the kit arrives. Thanks for the great service and quick email replies.
BTW, I now have 34 flights on the Carden Turboprop in the past 3 weeks. Not a single issue with the powerplant, turned up to 160,000 rpm.
Best regards,
Ron
The building board is cleaned off and I am waiting patiently. I have a second Wren Turboprop ordered and Roger has agreed to install smoke fittings on the exhaust.
I will start a new build (finish) thread once the kit arrives. Thanks for the great service and quick email replies.
BTW, I now have 34 flights on the Carden Turboprop in the past 3 weeks. Not a single issue with the powerplant, turned up to 160,000 rpm.
Best regards,
Ron