replacement gear for servo???
11-01-2005, 07:52 PM
#1
Senior Member
Thread Starter
Join Date: Aug 2005
Location: greendale,
IN
Posts: 2,544
Likes: 0
Received 0 Likes
on
0 Posts
replacement gear for servo???
got 2 futaba FP-S148 for steering and i broke the gears,[:@],,,can i just replace the gears, where to buy, how did u do it guys? or i need a new servo?...
11-01-2005, 08:14 PM
#2
Banned
My Feedback: (-1)
Join Date: Sep 2005
Location: Westerville, OH
Posts: 1,197
Likes: 0
Received 0 Likes
on
0 Posts
RE: replacement gear for servo???
You can buy the gear set's....go here http://www2.towerhobbies.com/cgi-bin...rs&FVPROFIL=++
11-02-2005, 08:01 AM
#4
RE: replacement gear for servo???
Stop
You're using a 148 for steering???
You better buy 20 sets of gears, because you'll keep on breaking them
I'd only use a 148 for throttle on one of my airplanes,,never in any of my RC cars or trucks.
What type of car is this you're using it in?
You're using a 148 for steering???
You better buy 20 sets of gears, because you'll keep on breaking them
I'd only use a 148 for throttle on one of my airplanes,,never in any of my RC cars or trucks.
What type of car is this you're using it in?
11-02-2005, 09:56 PM
#6
Senior Member
Thread Starter
Join Date: Aug 2005
Location: greendale,
IN
Posts: 2,544
Likes: 0
Received 0 Likes
on
0 Posts
RE: replacement gear for servo???
ORIGINAL: had enough
Stop
You're using a 148 for steering???
You better buy 20 sets of gears, because you'll keep on breaking them
I'd only use a 148 for throttle on one of my airplanes,,never in any of my RC cars or trucks.
What type of car is this you're using it in?
Stop
You're using a 148 for steering???
You better buy 20 sets of gears, because you'll keep on breaking them
I'd only use a 148 for throttle on one of my airplanes,,never in any of my RC cars or trucks.
What type of car is this you're using it in?
ok, that's why i got 2 servo breakdown already, i didn't even hit hard but these servo gear just breakin'....what can u recommend for steering servo??
J_D, what metal gear servo u suggest?...
thanks in advance
11-02-2005, 10:01 PM
#7
RE: replacement gear for servo???
How much you willing to spend
for a buggy like that a [link=http://www.servocity.com/html/hs-625mg_ultra_speed.html]hitec 635 metal gear [/link] would work fine,,,around $40
they only get more expensive from there
another great servo for the money is the [link=http://www.servocity.com/html/s9451_hi-speed_ball_bearing.html]Futaba 9451[/link] about $75
for a buggy like that a [link=http://www.servocity.com/html/hs-625mg_ultra_speed.html]hitec 635 metal gear [/link] would work fine,,,around $40
they only get more expensive from there
another great servo for the money is the [link=http://www.servocity.com/html/s9451_hi-speed_ball_bearing.html]Futaba 9451[/link] about $75
