OS 40 FSR Carb
#1
Junior Member
Thread Starter
My Feedback: (75)
Join Date: Sep 2002
Location: Sturgeon Bay,
WI
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
OS 40 FSR Carb
Does anyone know of any carburetors other than the OS 40 or 45FSR carb that will fit & work well in the older OS 40FSR engines?? Thanks, Steve
#2
Senior Member
RE: OS 40 FSR Carb
Steve,
The MVVS #3216 carburettor will fit perfectly.
It has a 13 mm diameter spigot and a 7 mm choke diameter.
It has no bolt holes because it is usually held in place by a pinch bolt.
But there is plenty of metal in the spigot, to drill and tap it for the carburettor bolts.
Editted to correct typographical error.
The MVVS #3216 carburettor will fit perfectly.
It has a 13 mm diameter spigot and a 7 mm choke diameter.
It has no bolt holes because it is usually held in place by a pinch bolt.
But there is plenty of metal in the spigot, to drill and tap it for the carburettor bolts.
Editted to correct typographical error.
#5
My Feedback: (12)
RE: OS 40 FSR Carb
ORIGINAL: mafjerst
I'm looking for a needle valve and a manual for a OS 40FSR
I'm looking for a needle valve and a manual for a OS 40FSR
Needle valve: http://www2.towerhobbies.com/cgi-bin...?&I=LXCR18&P=7
#6
Senior Member
Join Date: Jun 2004
Location: Cocoa,
FL
Posts: 265
Likes: 0
Received 0 Likes
on
0 Posts
RE: OS 40 FSR Carb
>I'm looking for a needle valve and a manual for a OS 40FSR<
I have several of the needle valves you are looking for NIP ....... six bucks per NV to your mailbox in padded envelope. I will take cash or postal money order, PM me if interested and I will send you my mailing address.
I have several of the needle valves you are looking for NIP ....... six bucks per NV to your mailbox in padded envelope. I will take cash or postal money order, PM me if interested and I will send you my mailing address.