How Come?
11-16-2002, 06:19 PM
#1
Senior Member
Thread Starter
My Feedback: (3)
Join Date: Jun 2002
Location: Lakeland,
FL
Posts: 311
Likes: 0
Received 0 Likes
on
0 Posts
How Come?
I run Ellegi Technics foam tires on my Nitro TC3. I use 42 in front and 45 in the rear. They work great! I tried using 35's all around, but my car would just slide around, same when I tried JACO green, and pink. So, how would I set my car to run the 35's? Such as springs, shock pistons and such.
11-18-2002, 05:18 AM
#2
Member
Join Date: Oct 2002
Location: johor bahru, MALAYSIA
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
35/35 here
i'm runnin a 35/35 here.
seems ok to me or suitable with the track out here medium surface.... a bit slidin here and there
when i put to much steerin or throttle....
but my basic setup is....front suspension must be
harder than rear. and rear ride height should be even or lower than front.
not to forget 2-3 degrees camber on the rear
and 2-3 degrees toe in at the rear
for me this is the thing to adjust....
ok...
seems ok to me or suitable with the track out here medium surface.... a bit slidin here and there
when i put to much steerin or throttle....
but my basic setup is....front suspension must be
harder than rear. and rear ride height should be even or lower than front.
not to forget 2-3 degrees camber on the rear
and 2-3 degrees toe in at the rear
for me this is the thing to adjust....
ok...
