E-Maxx: trinity motors cold, need to pick your brains..
01-22-2006, 08:09 AM
#1
Senior Member
Thread Starter
Join Date: Apr 2004
Location: Bristol, UNITED KINGDOM
Posts: 313
Likes: 0
Received 0 Likes
on
0 Posts
E-Maxx: trinity motors cold, need to pick your brains..
Hi as you can see in my gallery I have an emaxx with trinity monster maxx wild motors amognst other things.
I've got two fairly inexpensive 7.2v packs in atm, and the motors are not even getting warm. OK, it's geared a bit lower for torque (15t on robinson 66 spur) but even when I run it flat out for some time, achieving about 20mph, they are both almost cold. They used to get warm, does anyone have any ideas? It's not like the performance has dropped off...
FYI The batteries get warmish, and hotter towards the end of their cycle, but not overheating, they're fine I think.
Also I have a vibration at about 5mph which is quite noticeable, but it disappears at higher speeds, any ideas?
I've got two fairly inexpensive 7.2v packs in atm, and the motors are not even getting warm. OK, it's geared a bit lower for torque (15t on robinson 66 spur) but even when I run it flat out for some time, achieving about 20mph, they are both almost cold. They used to get warm, does anyone have any ideas? It's not like the performance has dropped off...
FYI The batteries get warmish, and hotter towards the end of their cycle, but not overheating, they're fine I think.
Also I have a vibration at about 5mph which is quite noticeable, but it disappears at higher speeds, any ideas?
