mini servos versus 1 standard
11-25-2002, 03:35 AM
#1
Senior Member
Thread Starter
My Feedback: (24)
Join Date: Apr 2002
Location: fairmont,
WV
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
mini servos versus 1 standard
Would two mini servos with 25 oz. torq. work for a split elevator. If i went with the single standard it would only be 45-50 oz. any way. this is for a 30 size yellow aircraft cap 232.
11-25-2002, 03:45 AM
#2
Senior Member
My Feedback: (5)
Join Date: Sep 2002
Location: sterling hts, MI
Posts: 1,070
Likes: 0
Received 0 Likes
on
0 Posts
mini servos versus 1 standard
I tried that and the elevator flutterd but i cought it in time. i fixed it with stock servos but the ailron flutterd and the plane went in.
mini servos on a 232 on elevator and ailrons. sorry
mini servos on a 232 on elevator and ailrons. sorry
11-25-2002, 03:48 AM
#3
Senior Member
My Feedback: (22)
Join Date: Jan 2002
Location: Plano,
TX
Posts: 753
Likes: 0
Received 0 Likes
on
0 Posts
mini servos versus 1 standard
You cant just think of the torque rating in the decision of a servo... The vibration of the surface would Destroy a mini servo in a 60+ size plane.
But for a 30 size Cap, I think you will be plenty fine.. Good Luck
But for a 30 size Cap, I think you will be plenty fine.. Good Luck
11-25-2002, 03:51 AM
#4
Senior Member
Join Date: Aug 2002
Location: sunnyvale, CA
Posts: 475
Likes: 0
Received 0 Likes
on
0 Posts
mini servos versus 1 standard
frind of mine has an HS 225 on each half of the elevator on a Funky 60 Giles 300. No problems there. He also but HS 81s on a WM 40 Cap 232. They stripped, and then he went to metal gears and they were fine.
