help gear ?
02-02-2006, 09:44 PM
#1
Junior Member
Thread Starter
Join Date: Feb 2006
Location: , OK
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
help gear ?
im looking for a gear that will fit this shaft Diameter: 3/16" + .010" [or 0.197"] (5.0 mm)
Exposed Shaft Length: 1/2"
i usually use the 3949 with a 550 series motor...i switched to a 700 series motor but still need to use the 19 tooth 32 pitch gear.
is there a gear with a bigger diameter set screw hole but still uses the same 19tooth configuration as the 3949??
thanks for your help
Exposed Shaft Length: 1/2"
i usually use the 3949 with a 550 series motor...i switched to a 700 series motor but still need to use the 19 tooth 32 pitch gear.
is there a gear with a bigger diameter set screw hole but still uses the same 19tooth configuration as the 3949??
thanks for your help
