fuel flow problem!
#1
Senior Member
Thread Starter
Join Date: Nov 2005
Location: indy, IN
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
fuel flow problem!
I can't get my savage .25 to start. There doesn't seem to be any fuel flow through the line. It's not leaking... I checked that. What else could be the problem?
#3
Senior Member
Join Date: Jan 2006
Location: carmel,
NY
Posts: 2,873
Likes: 0
Received 0 Likes
on
0 Posts
RE: fuel flow problem!
some thing happened to me like this there was no leaks and when i would try to prime it the fuel wouldn't go. i took off the high speed neddle and then tried to prime it again and fuel went through it and it worked but i also put it back to factory settings.
nick
nick
#4
Senior Member
Join Date: Dec 2005
Location: HARLEYSVILLE, PA
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
RE: fuel flow problem!
Fill yout tank, make sure the lid is sealed by pushing down on it. Then cover the exhaust opening with your finger. Turn over engine and watch the fuel line. When fuel reachs the carb , stop cranking. Now it should be ready to start. Put glow plug igniter on and try cranking engine over. Hope this helps..