Da100 back to idle
#1
Senior Member
Thread Starter
Join Date: Jul 2005
Location: Kuwait, KUWAIT
Posts: 452
Likes: 0
Received 0 Likes
on
0 Posts
Da100 back to idle
Anyone came across a DA100 going back to idle in a 45 degree dive or inverted ?
Electronics i.e. servos linkages have all been checked nothing spotted there, the only logical explanation that comes to mind is a faulty ignition or a bad carb spring.
Any feedback would help.
Thanks
Electronics i.e. servos linkages have all been checked nothing spotted there, the only logical explanation that comes to mind is a faulty ignition or a bad carb spring.
Any feedback would help.
Thanks
#2
Senior Member
My Feedback: (16)
Join Date: Apr 2002
Location: Locust Grove,
GA
Posts: 12,942
Likes: 0
Received 0 Likes
on
0 Posts
RE: Da100 back to idle
If it looses power that is one thing.
If it goes to idle that is completely different.
Does it do it all the time when inverted?
Nothing should cause it to go to idle except for throttle position.
If you are loosing power, then it could be the ignition but the attitude of the plane should not make any difference.
If it goes to idle that is completely different.
Does it do it all the time when inverted?
Nothing should cause it to go to idle except for throttle position.
If you are loosing power, then it could be the ignition but the attitude of the plane should not make any difference.