ILLUMINATE THE CANOPY FROM INSIDE
05-06-2006, 11:39 PM
#1
Member
Thread Starter
Join Date: Mar 2006
Location: Napa,
CA
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
ILLUMINATE THE CANOPY FROM INSIDE
HI ALL
I HAVE NEVER EVER PAINTED MODELS OF ANY KIND SO IF IAM DOING IT WRONG PLEASE TELL ME. IT SEEMED TO ME THE BEST WAY TO PAINT THE CANOPY IS ON THE INSIDE. GRANTED IT WOULD BE HARD TO GO WITH THE FLAT PAINT LOOK BUT WHAT THE HELL!
I WAS EXPERIMENTING WITH SOMETHING DIFFERENT. WHAT I HAVE DONE IS SPRAYED A LIGHT COAT OF WHITE PRIMER PAINT TO THE INSIDE OF THE CANOPY . SUPER LIGHT ALMOST OPAQUE IN COLOR. iM THINK NOW THAT PEARL WOULD EVEN LOOK BAD ASS AND AT THE SAME TIME HOLD THE QUALITYS SOME OF OUR LADY MEMBERS WOULD THINKLOOKS CUTE. I HAVE EVERY PHOTON LIGHT IN COLOR MADE AND WHEN THEIR ALL ON BLINKING, STROBING. AND SOS-ING IT DRAWS LOOKS FROM EVERYWHERE. I WONDERED WHAT WOULD HAPPEN IF I INJECTED THE LIGHT INTO THE CANOPY, SO I TRIED IT AND IT WASENT ANYTHING SPECIAL THEN I REALIZED I NEEDED SOMETHING TO HELP REFLECT IT AROUND BY PAINTING THE SURFACE I CAN BOUNCE LIGHT EVERYWHERE INSIDE. I CAN MIX ALL KINDS OF COLORS TOGETHER AND IT REALLY ILLUMINATES TO A POINT WHERE IT SEEMS LIKE IT SPITS OUT OF THE FOUR THERMAL PORTS. IT REALLY GIVES A THREE DIMENSIONAL COLORFUL VIEW OF EVERYTHING INSIDE. I ALSO HAVE AN ULTRAVIOLET LIGHT I USE TO ILLUMINATE MY "HEADING ORIENTATION, CAPACITOR MOTOR PROTECTION DEVICE PATENT#1876598365896754
HEHE THAT KILLS ME BUT BACK TO THE LIGHT. iF ANYONE IS USING A WHITE LIGHT TO ILLUMINATE THE FRONT BALL. IF YOU THINK IT IS BRIGHT NOW JUST POINT A PHOTON ULTRAVIOLET AT IT. I AM NOW USING MASKING TAPE AS THE FINAL COVERING ON THE UNDERSIDE OF THE FRONT BLADE. IT IS EASY TO PAINT WHITE THEN FLOURSENT
ORANGE. WITH THIS LIGHT ON STROBEIT ILLUMINATES THE BALL AND THERE IS A SPOT ON THE BLADES WHERE I GET AN ENTIRE SHOT AT THE BLADE. WITH A WHITE LIGHT IT WOULSD SORT OF LIGHT THE BLADE BUT WITH THE PHOTON AND ON STROBE (THE BATTERIES LAST WAY LONGER ON STROBE THAN ON SOLID AND IT LOOKS NEATER AND CATCHES EVERYONE EYE. GOT TO RUN TELL YOU ALL LATER ABOUT THE GREAT COPTER CAPER LATER
MIKE
I HAVE NEVER EVER PAINTED MODELS OF ANY KIND SO IF IAM DOING IT WRONG PLEASE TELL ME. IT SEEMED TO ME THE BEST WAY TO PAINT THE CANOPY IS ON THE INSIDE. GRANTED IT WOULD BE HARD TO GO WITH THE FLAT PAINT LOOK BUT WHAT THE HELL!
I WAS EXPERIMENTING WITH SOMETHING DIFFERENT. WHAT I HAVE DONE IS SPRAYED A LIGHT COAT OF WHITE PRIMER PAINT TO THE INSIDE OF THE CANOPY . SUPER LIGHT ALMOST OPAQUE IN COLOR. iM THINK NOW THAT PEARL WOULD EVEN LOOK BAD ASS AND AT THE SAME TIME HOLD THE QUALITYS SOME OF OUR LADY MEMBERS WOULD THINKLOOKS CUTE. I HAVE EVERY PHOTON LIGHT IN COLOR MADE AND WHEN THEIR ALL ON BLINKING, STROBING. AND SOS-ING IT DRAWS LOOKS FROM EVERYWHERE. I WONDERED WHAT WOULD HAPPEN IF I INJECTED THE LIGHT INTO THE CANOPY, SO I TRIED IT AND IT WASENT ANYTHING SPECIAL THEN I REALIZED I NEEDED SOMETHING TO HELP REFLECT IT AROUND BY PAINTING THE SURFACE I CAN BOUNCE LIGHT EVERYWHERE INSIDE. I CAN MIX ALL KINDS OF COLORS TOGETHER AND IT REALLY ILLUMINATES TO A POINT WHERE IT SEEMS LIKE IT SPITS OUT OF THE FOUR THERMAL PORTS. IT REALLY GIVES A THREE DIMENSIONAL COLORFUL VIEW OF EVERYTHING INSIDE. I ALSO HAVE AN ULTRAVIOLET LIGHT I USE TO ILLUMINATE MY "HEADING ORIENTATION, CAPACITOR MOTOR PROTECTION DEVICE PATENT#1876598365896754
HEHE THAT KILLS ME BUT BACK TO THE LIGHT. iF ANYONE IS USING A WHITE LIGHT TO ILLUMINATE THE FRONT BALL. IF YOU THINK IT IS BRIGHT NOW JUST POINT A PHOTON ULTRAVIOLET AT IT. I AM NOW USING MASKING TAPE AS THE FINAL COVERING ON THE UNDERSIDE OF THE FRONT BLADE. IT IS EASY TO PAINT WHITE THEN FLOURSENTORANGE. WITH THIS LIGHT ON STROBEIT ILLUMINATES THE BALL AND THERE IS A SPOT ON THE BLADES WHERE I GET AN ENTIRE SHOT AT THE BLADE. WITH A WHITE LIGHT IT WOULSD SORT OF LIGHT THE BLADE BUT WITH THE PHOTON AND ON STROBE (THE BATTERIES LAST WAY LONGER ON STROBE THAN ON SOLID AND IT LOOKS NEATER AND CATCHES EVERYONE EYE. GOT TO RUN TELL YOU ALL LATER ABOUT THE GREAT COPTER CAPER LATER
MIKE
