ShowTime 4D - MVVS26GT - Servos?
#1
Thread Starter
My Feedback: (50)
Join Date: Feb 2002
Location: Pasadena,
CA
Posts: 2,097
Likes: 0
Received 0 Likes
on
0 Posts
ShowTime 4D - MVVS26GT - Servos?
I'm so used to my 40% planes and know exactly what servos to use in them. I just ordered this ST4D from Horizon Hobby to put my MVVS26GT engine with pipe in. Horizon recommends the JRPS9411 servos at 81 oz/in, but I was wondering if I could get by with the JRDS821 at 72 oz/in, since they are digital. If not I guess I'll just get some 5645 even though I'm not a great fan of those. I also have some brand new Futaba S9001 here, which has 72 oz/in also. I have a Hitec HS5995TG for the rudder, but I am concerned about how much force is needed on the ailerons. Maybe I could get JRDS812 for elevators and HS5945MG for ailerons, but you tell me.
DKjens
DKjens
#2
Senior Member
My Feedback: (6)
Join Date: Mar 2003
Location: Walnut,
CA
Posts: 636
Likes: 0
Received 0 Likes
on
0 Posts
RE: ShowTime 4D - MVVS26GT - Servos?
Hey Jens,
I've got some servos...from my 50cc "Half-time" You KNOW they hold up to full throttle walls and such other wild stuff.
4 x HS 5645MG with Dubro HD arms, or the blue standard metal arms if you want.
1 x HS 5945MG with 3" Airwild double arm for pull-pull on rudder.
$180 for all. What a deal!!
Let me know.
L8tr
I've got some servos...from my 50cc "Half-time" You KNOW they hold up to full throttle walls and such other wild stuff.
4 x HS 5645MG with Dubro HD arms, or the blue standard metal arms if you want.
1 x HS 5945MG with 3" Airwild double arm for pull-pull on rudder.
$180 for all. What a deal!!
Let me know.
L8tr
#3
Senior Member
My Feedback: (8)
Join Date: Dec 2004
Location: Sebastian,
FL
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
RE: ShowTime 4D - MVVS26GT - Servos?
DKjens, I have been flying a Showtime for quite awhile now using 72 oz/in servos on the ailerons. Blenders, walls, you name it. I have had no blow back or any other type of problem. I believe the JRDS821s should be great. [8D]