Syncronizing servos
02-28-2007, 08:56 PM
#1
Junior Member
Thread Starter
Join Date: May 2006
Location: Coeur d alene,
ID
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Syncronizing servos
I anm converting the Seagull models 3d bling to electric. This plane requires multiple servos on each surface. I have 4 smart fly equalizers, one for each servo group. What is the best, easiest, correct way for syncing the servos with this device. I have spent days trying to set up the left wing aileron servos. I have a 9chp futaba, I think that is the model, anyway, does it have the sync capability built in?
03-01-2007, 09:46 AM
#2
Senior Member
My Feedback: (2)
Join Date: Sep 2004
Location: Johns Creek,
GA
Posts: 7,457
Likes: 0
Received 0 Likes
on
0 Posts
RE: Syncronizing servos
I thought that model used one servo per surface?
ailerons in 1 and 6, use flaperon
elevators in 2 and 8, use ailevator
throttle in 3
rudder in 4
ailerons in 1 and 6, use flaperon
elevators in 2 and 8, use ailevator
throttle in 3
rudder in 4
03-01-2007, 09:08 PM
#3
Junior Member
Thread Starter
Join Date: May 2006
Location: Coeur d alene,
ID
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
RE: Syncronizing servos
What about centering and end point adjustments. There are a total of 8 servos. I going electric. 4 for ailerons 2 for elevator and 2 for rudder. I just want to set up the servos properly.
