Servo problem
#1
Member
Thread Starter
Join Date: Mar 2007
Location: Victor,
ID
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Servo problem
i have a savage .21 and i put a hpi sf 2 steering servo on and i drove my truck around for a bout 10 minutes and it stripped one of the gears in the servo so i took out the servo and put another one in and i ran about 1-2 tanks of gas through it and the same gear stripped again, so i put another one on and it did the same thing can figure out what is wrong.
#3
Senior Member
Join Date: Sep 2006
Location: Menasha,
WI
Posts: 2,655
Likes: 0
Received 0 Likes
on
0 Posts
RE: Servo problem
Get a metal geared servo. Other then that im not sure why your stripping them your servo saver could be too tight. Or your end point adjustments on your controller could be set too high.