Nitr0-is-Deadly

my clutch shoes are ripped were the flywheel attaches to them..i have a pic..the clutch still works but..i wander if this is causing performance loss

tommythecat

My Feedback: (2)

Edit: changed my answer:

Either Global Warming or Solar Flares

flaminheli

Stick you a new set of MIP clutches in there.

Nitr0-is-Deadly

its odd tho it works but this all started happening when my owb in the ez start blew..i am buying a bump box and most likely the mip's

carl250r

I would say that horse power did that.

i nice good little afordable clutch set is the MIP heavy duty replacement 2 shoe clutch kit. i am talking cheap and easy. good to, and adjustable.

Freezetron

Actually the stock clutches work well according to my LHS and their only like $8, so you may wanna try another set before swapping. May have just been defective

flaminheli

He could go back stock, but I know from experience that the MIP shoes last longer than stock ones and they are a direct replacement.

smaxx3.3

lol they aren't much better, this happened to my mip's

the spring was sticking out of the body, i took the bell off and little piece's of clutch shoes fell out.

flaminheli

Sorry to hear that, but I have always had better reults from MIP than stock. I have never had a set come apart, all of mine just wear down. I guess it's all about how it's set up. You can install them backwards, maybe that is what happened. Darn teenagers.

XpressHobby

Try the Integy 7075 clutch conversion. They should work. Here's the link: [link]http://integy.automated-shops.com/cgi-bin/webc.cgi/st_prod.html?p_prodid=4362&p_catid=29&sid=4wSJJh1k [email protected][/link]

89ram

you forgot bovine flatulence

flaminheli

Sorry XpressHobby.com, but that is not a good setup at all. I am sure I am not alone on that opinion. I actually melted a set to the bell and everyone I know that has ran them did not like them at all. Now you can use the three shoe flywheel and trim down three stock style shoes and that would work great, I have seen it done. That would last alot longer than the Integy shoes.

tommythecat

My Feedback: (2)

That is exactly what I did on my t-maxx. Bought the integy 3 shoe clutch, cooked it in one afternoon, smoked the shoes, wore a groove in my clutchbell with my spring and then snapped the spring. I ended up putting 3 shortened stock fiber shoes on and it works like a charm

Quickywd01

My Feedback: (3)

There have been many people saying the aluminum shoes are the worst setup.