torque servo
06-22-2007, 08:45 AM
#1
Senior Member
Thread Starter
Join Date: Jan 2007
Location: south normanton, UNITED KINGDOM
Posts: 1,347
Likes: 0
Received 0 Likes
on
0 Posts
torque servo
are these good servos for single steering on the revo
[link=http://cgi.ebay.co.uk/TOWER-PRO-MG995-HIGH-TORQUE-DIGITAL-SERVO-HYPER-7-HITEC_W0QQitemZ220108881948QQihZ012QQcategoryZ1916 8QQrdZ1QQssPageNameZWD1VQQcmdZViewItem]http://cgi.ebay.co.uk/TOWER-PRO-MG995-HIGH-TORQUE-DIGITAL-SERVO-HYPER-7-HITEC_W0QQitemZ220108881948QQihZ012QQcategoryZ1916 8QQrdZ1QQssPageNameZWD1VQQcmdZViewItem[/link]
[link=http://cgi.ebay.co.uk/Futaba-S3305-High-Torque-Metal-Gear-Servo_W0QQitemZ280126831346QQihZ018QQcategoryZ3405 6QQssPageNameZWDVWQQrdZ1QQcmdZViewItem]http://cgi.ebay.co.uk/Futaba-S3305-High-Torque-Metal-Gear-Servo_W0QQitemZ280126831346QQihZ018QQcategoryZ3405 6QQssPageNameZWDVWQQrdZ1QQcmdZViewItem[/link]
[link=http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ih=002&sspagename=STRK%3AME WA%3APIC&viewitem=&item=120133135551&rd=1&rd=1]http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ih=002&sspagename=STRK%3AME WA%3APIC&viewitem=&item=120133135551&rd=1&rd=1[/link]
thank you
[link=http://cgi.ebay.co.uk/TOWER-PRO-MG995-HIGH-TORQUE-DIGITAL-SERVO-HYPER-7-HITEC_W0QQitemZ220108881948QQihZ012QQcategoryZ1916 8QQrdZ1QQssPageNameZWD1VQQcmdZViewItem]http://cgi.ebay.co.uk/TOWER-PRO-MG995-HIGH-TORQUE-DIGITAL-SERVO-HYPER-7-HITEC_W0QQitemZ220108881948QQihZ012QQcategoryZ1916 8QQrdZ1QQssPageNameZWD1VQQcmdZViewItem[/link]
[link=http://cgi.ebay.co.uk/Futaba-S3305-High-Torque-Metal-Gear-Servo_W0QQitemZ280126831346QQihZ018QQcategoryZ3405 6QQssPageNameZWDVWQQrdZ1QQcmdZViewItem]http://cgi.ebay.co.uk/Futaba-S3305-High-Torque-Metal-Gear-Servo_W0QQitemZ280126831346QQihZ018QQcategoryZ3405 6QQssPageNameZWDVWQQrdZ1QQcmdZViewItem[/link]
[link=http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ih=002&sspagename=STRK%3AME WA%3APIC&viewitem=&item=120133135551&rd=1&rd=1]http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ih=002&sspagename=STRK%3AME WA%3APIC&viewitem=&item=120133135551&rd=1&rd=1[/link]
thank you
06-22-2007, 09:54 AM
#2
Senior Member
RE: torque servo
I personally run a Hitec HS-645MG in my Tmaxx and it works great. It easily turns the wheels on the ground. The 645MG is great, but the Hitec HS-5645MG is even better.
Here are the specs for both:
HS-5645MG
Speed: 0.23 sec/60° at 4.8V
Speed: 0.18 sec/60° at 6.0V
Torque: 143.03 oz-in at 4.8V
Torque: 164.2 oz-in at 6V
HS-645MG
Speed: 0.24 sec/60° at 4.8V
Speed: 0.20 sec/60° at 6.0V
Torque: 106.93 oz-in at 4.8V
Torque: 133.31 oz-in at 6.0V
I edited my post because I forgot to mention that I had to change the stock servo saver to one that fit the hitec servo.
Here are the specs for both:
HS-5645MG
Speed: 0.23 sec/60° at 4.8V
Speed: 0.18 sec/60° at 6.0V
Torque: 143.03 oz-in at 4.8V
Torque: 164.2 oz-in at 6V
HS-645MG
Speed: 0.24 sec/60° at 4.8V
Speed: 0.20 sec/60° at 6.0V
Torque: 106.93 oz-in at 4.8V
Torque: 133.31 oz-in at 6.0V
I edited my post because I forgot to mention that I had to change the stock servo saver to one that fit the hitec servo.
06-27-2007, 04:51 PM
#7
Senior Member
Thread Starter
Join Date: Jan 2007
Location: south normanton, UNITED KINGDOM
Posts: 1,347
Likes: 0
Received 0 Likes
on
0 Posts
RE: torque servo
ORIGINAL: T-Mo69
i use a single servo....it is rated for 320 oz/in at .15 sec (6v)....it was around a hundred bucks and it rocks
i use a single servo....it is rated for 320 oz/in at .15 sec (6v)....it was around a hundred bucks and it rocks
cool bet you have great steering
