fei bao email address
#2
Senior Member
Join Date: Nov 2005
Location: Henderson, NV
Posts: 2,778
Likes: 0
Received 0 Likes
on
0 Posts
RE: fei bao email address
#3
Senior Member
Thread Starter
Join Date: Jul 2004
Location: FAIRFIELD ,
CA
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
RE: fei bao email address
i am building a red arrow hawk and the elevator former was installed incorectly the elevators do not line up with the fuselage. on one side the leading edge rubs the fuslage and the other side has a large gap wile on the trailing edge the opposite side do the sam one touches and the other a gapp the elevators are fine if the former was straight they would be perfectly aligned. i was wondering how to correct that ,by replacing the aft fuse section or getting new parts and replacing the existing parts there are 4 parts involed .
Arden
Arden
#4
My Feedback: (14)
RE: fei bao email address
ORIGINAL: A MAY
i am building a red arrow hawk and the elevator former was installed incorectly the elevators do not line up with the fuselage. on one side the leading edge rubs the fuslage and the other side has a large gap wile on the trailing edge the opposite side do the sam one touches and the other a gapp the elevators are fine if the former was straight they would be perfectly aligned. i was wondering how to correct that ,by replacing the aft fuse section or getting new parts and replacing the existing parts there are 4 parts involed .
Arden
i am building a red arrow hawk and the elevator former was installed incorectly the elevators do not line up with the fuselage. on one side the leading edge rubs the fuslage and the other side has a large gap wile on the trailing edge the opposite side do the sam one touches and the other a gapp the elevators are fine if the former was straight they would be perfectly aligned. i was wondering how to correct that ,by replacing the aft fuse section or getting new parts and replacing the existing parts there are 4 parts involed .
Arden
Rgs
Alejandro
#5
Senior Member
Thread Starter
Join Date: Jul 2004
Location: FAIRFIELD ,
CA
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
RE: fei bao email address
i plan on doing so sence i did get the plane from tam.he is very helpful he would give me a new plane or aft fuse but i think i would rather get the replacement formers and replace them. then i know they are installed correctly. if i could get them from the factory (fei bao) i would not have to bother a very busy man.
Arden
Arden
#6
Senior Member
Join Date: Aug 2003
Location: Honolulu,
HI
Posts: 984
Likes: 0
Received 0 Likes
on
0 Posts
RE: fei bao email address
#7
Senior Member
Thread Starter
Join Date: Jul 2004
Location: FAIRFIELD ,
CA
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
RE: fei bao email address
Thank You.
Eric
i just wanted to email fei bao to see if they could send me the parts so i would not have to bother tam
Arden
Eric
i just wanted to email fei bao to see if they could send me the parts so i would not have to bother tam
Arden