Go Back  RCU Forums > RC Airplanes > Tips & Techniques
Reload this Page >

cheap reciever, fuel tank battery e.t.c protection

Community
Search
Notices
Tips & Techniques Want to share a tip or special technique you have either in the workshop or at the flying field or race track? Post it right here!

cheap reciever, fuel tank battery e.t.c protection

Thread Tools
 
Search this Thread
 
Old 07-16-2007, 12:52 PM
  #1  
Wild Foamy
Senior Member
Thread Starter
 
Wild Foamy's Avatar
 
Join Date: Oct 2006
Location: Newbury, UNITED KINGDOM
Posts: 1,009
Likes: 0
Received 1 Like on 1 Post
Default cheap reciever, fuel tank battery e.t.c protection

hi guys

ive just discovered that if you buy a giant car sponge from a car boot sale for 50p or walmart or wherever you americans get your home supplies from, cut it in half, then partly hollow out the middle you can fit your reciever in it with enough foam left over to wrap your battery and maybe your fuel tank and other bits and pieces. hence protecting the said areas in the event of a crash, and best of all its cheap!

50p to protect £30 worth of reciever... and about £5-£10 battery

think about it...
Old 07-16-2007, 01:12 PM
  #2  
exeter_acres
Senior Member
My Feedback: (2)
 
exeter_acres's Avatar
 
Join Date: Sep 2004
Location: Johns Creek, GA
Posts: 7,457
Likes: 0
Received 0 Likes on 0 Posts
Default RE: cheap reciever, fuel tank battery e.t.c protection

.....
Old 07-16-2007, 02:00 PM
  #3  
FlyerInOKC
My Feedback: (6)
 
FlyerInOKC's Avatar
 
Join Date: Nov 2004
Location: Oklahoma City, OK
Posts: 14,216
Received 281 Likes on 243 Posts
Default RE: cheap reciever, fuel tank battery e.t.c protection

The problem with that is the sponge may be OK for impact protection but it fails in the more importaint vibration protection. That is why the specialty foam rubber is better.
Old 07-16-2007, 03:44 PM
  #4  
Wild Foamy
Senior Member
Thread Starter
 
Wild Foamy's Avatar
 
Join Date: Oct 2006
Location: Newbury, UNITED KINGDOM
Posts: 1,009
Likes: 0
Received 1 Like on 1 Post
Default RE: cheap reciever, fuel tank battery e.t.c protection

the sponge seems alright for vibration, what makes you say otherwise? :S

its better than having the RX stuck against the bulkhead with some double sided tape (that was the setup prior to the sponge)
Old 07-16-2007, 04:34 PM
  #5  
Laird SS
Senior Member
 
Join Date: Apr 2005
Location: Peoria, AZ
Posts: 603
Likes: 0
Received 0 Likes on 0 Posts
Default RE: cheap reciever, fuel tank battery e.t.c protection

I would guess the amount of vibration protection would depend on the type of sponge you use, wouldn't it? If the sponge is soft when it's dry, it should be OK, but if it's not (well I'll leave that one up to you)...
Old 07-16-2007, 07:29 PM
  #6  
gary9648
My Feedback: (1)
 
Join Date: Oct 2002
Location: Troy, OH
Posts: 1,336
Likes: 0
Received 1 Like on 1 Post
Default RE: cheap reciever, fuel tank battery e.t.c protection

Normally man made sponge rubber does not dampen vibration. Yes it will help is crush mode. The natural rubber does both very well. I will not use anything but natural to protect my $150.00 PCM recievers, and the life blood of our connection the battery. Just my two cents worth.
Gary
Old 07-16-2007, 07:59 PM
  #7  
mickeymouse23
Senior Member
My Feedback: (1)
 
Join Date: Jan 2003
Location: DeWitt, IA
Posts: 156
Likes: 0
Received 0 Likes on 0 Posts
Default RE: cheap reciever, fuel tank battery e.t.c protection

i use foam out of old couches,futon matress, anything is better then nothing
Old 07-16-2007, 08:00 PM
  #8  
mickeymouse23
Senior Member
My Feedback: (1)
 
Join Date: Jan 2003
Location: DeWitt, IA
Posts: 156
Likes: 0
Received 0 Likes on 0 Posts
Default RE: cheap reciever, fuel tank battery e.t.c protection

i use foam out of old couches,futon matress, anything is better then nothing
Old 07-17-2007, 01:47 AM
  #9  
Wild Foamy
Senior Member
Thread Starter
 
Wild Foamy's Avatar
 
Join Date: Oct 2006
Location: Newbury, UNITED KINGDOM
Posts: 1,009
Likes: 0
Received 1 Like on 1 Post
Default RE: cheap reciever, fuel tank battery e.t.c protection

im using a giant car sponge (one of the ones you wash your car with) and its very soft and springy when dry,
Old 07-17-2007, 02:42 AM
  #10  
alan0899
 
Join Date: Apr 2006
Location: Warialda NSW, AUSTRALIA
Posts: 2,275
Likes: 0
Received 0 Likes on 0 Posts
Default RE: cheap reciever, fuel tank battery e.t.c protection

G'day Foamy,
To check if the foam you are using is any good, place it between you thumb & forefinger & squeeze, if you can flatten it so you two fingers close together, it is NO Good.
The RX or battery that you have wrapped in that foam, in a sudden stop will compress the foam, the same as your fingers did, so find a rubber type foam that has a bit more guts & protect your RX & battery.
Old 07-17-2007, 11:33 AM
  #11  
bigchap
Senior Member
 
Join Date: Mar 2004
Location: frimley,surrey., UNITED KINGDOM
Posts: 1,040
Likes: 0
Received 0 Likes on 0 Posts
Default RE: cheap reciever, fuel tank battery e.t.c protection

i use pipe insulation,you can get a very long length for very little money,never had a problem.
Old 07-17-2007, 08:32 PM
  #12  
tailskid
My Feedback: (34)
 
tailskid's Avatar
 
Join Date: Nov 2001
Location: Tolleson, AZ
Posts: 9,552
Received 7 Likes on 7 Posts
Default RE: cheap reciever, fuel tank battery e.t.c protection

To check for vibration - place the rx (or battery) on/in foam and place on a table saw (that should vibrate a lot) and touch the rx. can you feel the vibration? If so, don't use that foam.

Really we need two types of foam protection - one for vibration and the other for crash (impact) protection.... I like to wrap my rx in bubble wrap (great for vibration), and 1/4" foam from Du-Bro for crash protection - provided you have the room!
Old 09-11-2007, 01:45 PM
  #13  
TedMo
Senior Member
 
Join Date: Jun 2006
Location: Sun City Center, FL
Posts: 1,270
Likes: 0
Received 2 Likes on 2 Posts
Default RE: cheap reciever, fuel tank battery e.t.c protection

I prefer to use Du Bro 1/4 " foam for both RX and Battery. However have also often used the foam padding that they use for underlayment beneath rugs and have never had any problems using it for vibration or crash protection.It's odd that we spend so much on on planes radios etc. but seem to always try to save a buck on the essentials that provide safety for our expenitures.
Old 09-11-2007, 10:03 PM
  #14  
KitBuilder
 
KitBuilder's Avatar
 
Join Date: Feb 2007
Location: Palm Harbor, FL
Posts: 1,638
Likes: 0
Received 1 Like on 1 Post
Default RE: cheap reciever, fuel tank battery e.t.c protection


ORIGINAL: TedMo

I prefer to use Du Bro 1/4 " foam for both RX and Battery. However have also often used the foam padding that they use for underlayment beneath rugs and have never had any problems using it for vibration or crash protection.It's odd that we spend so much on on planes radios etc. but seem to always try to save a buck on the essentials that provide safety for our expenitures.
Ditto the carpet foam underlaymentg.. double wrapped works greats. Takes CA too.. you can make "boxes" out of it., etc. Being under carpet.. it's made to not compress to easily, somewhat dense, etc... but still soft. look behind a carpet store and you will find years worth !
Mike
Old 09-12-2007, 05:31 AM
  #15  
Insanemoondoggie
 
Insanemoondoggie's Avatar
 
Join Date: Nov 2006
Location: Altamont, MO
Posts: 2,475
Received 1 Like on 1 Post
Default RE: cheap reciever, fuel tank battery e.t.c protection

My wife picks me up can coolers at garage sales. has about the same density as Du-bro foam , at a fraction of the cost.
Old 09-12-2007, 09:08 AM
  #16  
FlyerInOKC
My Feedback: (6)
 
FlyerInOKC's Avatar
 
Join Date: Nov 2004
Location: Oklahoma City, OK
Posts: 14,216
Received 281 Likes on 243 Posts
Default RE: cheap reciever, fuel tank battery e.t.c protection

I found a foam at a local foam and fabric supply house that is the same density and thickness of the Dubro stuff and its $8.00 a 4 ft X 8 ft sheet when I took a sample with me.
Old 09-15-2007, 10:53 PM
  #17  
OzMo
Senior Member
My Feedback: (3)
 
OzMo's Avatar
 
Join Date: Sep 2002
Location: OZark, MO
Posts: 2,694
Likes: 0
Received 0 Likes on 0 Posts
Default RE: cheap reciever, fuel tank battery e.t.c protection


ORIGINAL: alan0899

G'day Foamy,
To check if the foam you are using is any good, place it between you thumb & forefinger & squeeze, if you can flatten it so you two fingers close together, it is NO Good.
The RX or battery that you have wrapped in that foam, in a sudden stop will compress the foam, the same as your fingers did, so find a rubber type foam that has a bit more guts & protect your RX & battery.
I disagree. ever do the old egg drop test? the more soft foam the better. However I prefer soft CLOSED cell foam that electronics come shipped in as this type of foam won't absorb fuel. So if you do use the sponge put your RX or battery in a baggie![8D]

RULE # 1: Use what you have!

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Contact Us - Manage Preferences Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.