Rjhpilot91

My Feedback: (4)

What are all of the trex owners out there using to monitor battery voltage levels so that they know when to land before discharging the battery too far?

madmodelman

Programme esc to early cut off then she pulses revs, time to think about landing then.

Tolla

HR Poly Li-Po monitor wit a very audible warning. worth the money imo.

ksechler

I just use a timer. I fly for 5:00 then land and recharge. I'm usually at 10.8-11 V at that point. Sure I could squeeze more time out of it but Lipo's are expensive.

rlsloan

Nothing.

john_doe

I use a timer and an EagleTree Micropower Flight logger in addition to confirm that I'm not abusing my batteries. So when the battery looses capacity over time, I can just use the graphs from the datalogger as a basis for setting the timer on my radio.