hybrid edge
12-17-2007, 12:16 PM
#1
Member
Thread Starter
Join Date: Feb 2006
Location: East Wenatchee,
WA
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
hybrid edge
Mike are the hard point dowels poplar I have looked everywhere and cant find it locally I made my dowels to short on 1 ail dry fit them and then the light came on that I still had to sheet at least ail2 cameout right any help.
Thanks,
Jeff
Thanks,
Jeff
12-17-2007, 12:53 PM
#2
My Feedback: (3)
Join Date: May 2002
Location: Beavercreek, OH,
Posts: 4,319
Likes: 0
Received 0 Likes
on
0 Posts
RE: hybrid edge
Hi Jeff, yes, just go to Lowes or Home Depot and buy some 1/2" hardwood dowel material. That is all these are. On the Hybrid I recall once you glue in the dowels into the ailerons, then you trim them off and sand flush. Hope this helps.
12-17-2007, 09:30 PM
#3
Member
Thread Starter
Join Date: Feb 2006
Location: East Wenatchee,
WA
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
RE: hybrid edge
Thanks mike, I dry fit it before sheeting the ail marked it got it all to fit real nice and went ?;'$ i still need to sheet oh well brain fade
Thanks again,
Jeff
Thanks again,
Jeff
