Brushless Motor Attachment Screws
#1
Senior Member
Thread Starter
Join Date: Nov 2007
Location: , AZ
Posts: 653
Likes: 0
Received 0 Likes
on
0 Posts
Brushless Motor Attachment Screws
The ones that they provide the screws for and don't fit any motor mounts are 3MM 50 pitch. Anybody know what the other two, the ones that fit the motor mount holes are?
#3
Senior Member
Thread Starter
Join Date: Nov 2007
Location: , AZ
Posts: 653
Likes: 0
Received 0 Likes
on
0 Posts
RE: Brushless Motor Attachment Screws
Take your pick
Motors
Scorpion HK 2221-8
Scorpion HK 2208-24
Z-Power ACE 450
Z-Power GT 450
HDX 3800
Helis
Microheli Advanced Pro Frame
CopterX 450
EXI
Belt CP
King V2
Motors
Scorpion HK 2221-8
Scorpion HK 2208-24
Z-Power ACE 450
Z-Power GT 450
HDX 3800
Helis
Microheli Advanced Pro Frame
CopterX 450
EXI
Belt CP
King V2
#4
Senior Member
Join Date: May 2007
Location: San Diego,
CA
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
RE: Brushless Motor Attachment Screws
Hmm, well I don't know any of those specifically, but if you're suggesting that all the 400/450 size stuff is the same then I'll throw this out there: For the Align 430 motors the other one is M2.6x6mm. Sorry I don't know the pitch, but would think it's a good bet they're the same as the M3x6mm.
#6
Senior Member
Join Date: May 2007
Location: San Diego,
CA
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
RE: Brushless Motor Attachment Screws
You might want to double check with helidirect and see if these are the right ones:
http://www.helidirect.com/product_in...oducts_id=6600
They're labeled as 2.5mm but maybe there's a mixup somewhere.
These might work, look like the same thing:
http://www3.towerhobbies.com/cgi-bin...?&I=LXDLN4&P=7
I've got a couple extra pairs (one hex and one philips). I could part with a pair if you want them. I'll send you my fubar'd 430L motor also if you're interested
http://www.helidirect.com/product_in...oducts_id=6600
They're labeled as 2.5mm but maybe there's a mixup somewhere.
These might work, look like the same thing:
http://www3.towerhobbies.com/cgi-bin...?&I=LXDLN4&P=7
I've got a couple extra pairs (one hex and one philips). I could part with a pair if you want them. I'll send you my fubar'd 430L motor also if you're interested
#7
Senior Member
Thread Starter
Join Date: Nov 2007
Location: , AZ
Posts: 653
Likes: 0
Received 0 Likes
on
0 Posts
RE: Brushless Motor Attachment Screws
Nope, 2.5MM won't fit. I found some at a local hardware store. SAE 3-48 is really close but they have to be 2.6. Thanks for your offer but Duratrax uses them on their R/C cars. There are a lot of car oriented hobbys shops here, I'll try them. Interesting side note. Esky uses 3MM for all four motor mount holes.