241 racing

My Feedback: (20)

I have a tusnami,yes I know it's red cat but I gave up on them for there lack of good service.I'm in need of some good replacement shocks for it since Iv'e blown the originals.Any info on what will fit and work better than the cheap ones it came with?Thanks for any input.

pede_187

I have the aluminum ones from the ultra wide on mine. I use 8 though. Huge difference over 4. Very nice shocks. Definately use 8 if you can.

pede_187

Or maybe some emaxx shocks

ehroof

either the aluminum shocks or t/emaxx shocks would be a great upgrade

aluminum shocks are #08041

241 racing

My Feedback: (20)

I take it this is a himoto part # and what are they off of.Emaxx shocks would work great all the way around/meaning all four?

ehroof

its a himoto or redcat part number, you would only need 4 of the tmaxx shocks, even the aluminum shocks, the mamba/tsunami is the same as the viper/volcano and they only use 4 shocks.

pede_187

I say.............if you get the aluminum shocks get 8 of them but if you get the t-maxx shocks only get 4

Redharris

I hope this helps....
I put Tmaxx shocks on my Volcano/Viper. Here are pics....
But arent the Tsunami shocks SHORTER than the Viper shocks?

ehroof

they are the same bro, shock towers and stuff are the same.

241 racing

My Feedback: (20)

So the Viper/Volcano uses the same parts as the tusnami?I ordered up some maxx shocks so should be good in a few days.I would rather order himoto parts for this thing rather than going through red cat.Thanks for the info.

Sorry but one more thing what rims and tires fit on this thing?Stock ones are about toast.

ehroof

most 12mm hex 2.2 or 2.8 rims will fit, the 2.8 jato rims look real nice. the mamba/viper use alot of the same parts, like the shock towers. the difference is the suspension, the truck uses pillowball and the truck uses c hub, they are not interchangable.