Burble During Inverted Flight
#1
Thread Starter
Join Date: Feb 2002
Location: Allen,
TX
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
Burble During Inverted Flight
I have a 3W100 on an AW Edge 33% and brought it out of retirement. Flies very well however I'm getting a burble when flying inverted. I have soldered a tube to the diaphragm opening and vented it into the airframe (which was done years ago but don't remember this being a problem) and have tried leaning the low end.
Any ideas?
Any ideas?
#2
My Feedback: (309)
Join Date: Jan 2002
Location: Loveland,
CO
Posts: 1,682
Likes: 0
Received 0 Likes
on
0 Posts
RE: Burble During Inverted Flight
You could try leaning the high end to see if that will help. Also, 3W has a new reed block that is supposed to help with the problem, I'm not sure if they make one for the 100, but if they do, you might try that.
Jim
Jim