Looking for real scale pickup kit
#1
Member
Thread Starter
My Feedback: (1)
Join Date: Dec 2001
Location: Gaithersburg,
MD
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Looking for real scale pickup kit
I'm looking for a realistic scale model of nitro pickups (Ford f-150, Toyota Tundra, Dodge Ram etc) in a kit form. I've looked everywhere but cant find any, any help would would be appreciated.
-Mikey
-Mikey
#2
Senior Member
Join Date: Feb 2007
Location: Laconia, NH
Posts: 1,157
Likes: 0
Received 0 Likes
on
0 Posts
RE: Looking for real scale pickup kit
Well I know tamiya has some scale trucks but there electric. Im not sure if theres any nitros out there that are scale. But maybe there is.
#4
RE: Looking for real scale pickup kit
yeh, youd need to do it custom. iv seen a custom chassis, with the nitro motor up front and rear drive that had a scale looking body mounted on it. the chassis had been made with the idea of a scale look in mind.
#5
Senior Member
Join Date: Feb 2006
Location: belfast, UNITED KINGDOM
Posts: 1,451
Likes: 0
Received 0 Likes
on
0 Posts
RE: Looking for real scale pickup kit
[X(] put like an .18 up front... and have it under the hood with an e-strater on board and fuel tank in the rear and the exhaust tracked out the rear .
that would be sooo kewl!
that would be sooo kewl!
#6
Senior Member
My Feedback: (1)
Join Date: Mar 2003
Location: Leola,
PA
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts
RE: Looking for real scale pickup kit
I think HPI makes a couple 1/10 body shells. Then get maybe a RS/4 of some type and look for a OS .12 LD. That engine is confiquired to lay down (LD). There getting hard to find,but their still around. You could fab a rear exit pipe for scale looks, it would lack power but I'm guessing that's not important.
Here's the engine installed on a Kyosho FW-04
Here's the engine installed on a Kyosho FW-04