mikenlapaz

I have been searching for some silicone hose 5/8" (.625" ) OD with a nomial 1/2" ID. without any success. Minimum useable length 5"
Can anyone point me in the right direction?
It would be similar to Aerotrend Ultrablue 1/2" ID but smaller.
Thanks

RC Extreme power

My Feedback: (24)

Have you tried Auto supply, Most carry High temp silicone hose.

Milton

mikenlapaz

The auto hose I found ,Google, had plys or fiber cords and I just discounted them, not sure why. I'll check that avenue.

RC Extreme power

My Feedback: (24)

This might work for you also, Not silicone but what most people use to couple headers with and works well, Look close to bottom of page.

Edit
25mm is close to 1/2"

http://troybuiltmodels.com/newsite/p...sories_da.html

Milton

rangerfredbob

My Feedback: (13)

25mm is close to an inch, 13mm is almost exactly a half inch...

RC Extreme power

My Feedback: (24)

Yep you are right, 25.4mm = 1"

Just brain dead

milton

Lifer

My Feedback: (1)

I've had good success using automotive heater hose for glow engines and the Dubro large exhaust extensions for gas. Somebody retails a gooseneck aluminum tubing for your needs but I can't remember who it is at this time.

Broken Wings

My Feedback: (20)

www.mcmaster.com

They have it all

Ialwayscrash

My Feedback: (106)

Try www.aerotrend.com