walbro carb rebuild kit extra pars
09-06-2008, 04:01 PM
#1
Senior Member
Thread Starter
Join Date: Jun 2008
Location: Laurel,
MD
Posts: 594
Likes: 0
Received 0 Likes
on
0 Posts
walbro carb rebuild kit extra pars
I have an SDC 80 carb for my Quadra 75.
The rebuild kit from Walbra seemed like it had extra gaskets and an extra part or two (circular c shaped ring and a filter screen)
It came w/ a circular screen. I did not see where that would go.
David
The rebuild kit from Walbra seemed like it had extra gaskets and an extra part or two (circular c shaped ring and a filter screen)
It came w/ a circular screen. I did not see where that would go.
David
09-07-2008, 09:08 AM
#2
RE: walbro carb rebuild kit extra pars
The screen most likely goes in the hole on the diaphram side of the carb, adjacent the internal needle.
Download the link below.... It is a service manual for Walbro Carbs and has a lot of good information.
http://www.wind-drifter.com/technica...viceManual.pdf
SunDevilPilot
Download the link below.... It is a service manual for Walbro Carbs and has a lot of good information.
http://www.wind-drifter.com/technica...viceManual.pdf
SunDevilPilot
09-07-2008, 07:53 PM
#3
Senior Member
My Feedback: (13)
Join Date: Jul 2005
Location: Salem,
OR
Posts: 1,686
Likes: 0
Received 0 Likes
on
0 Posts
RE: walbro carb rebuild kit extra pars
most walbro carb kits come with some extra parts to fit slightly different carbuerators, just replace what looks like what you take out 
