Trex250 problem
01-19-2009, 09:12 PM
#1
Member
Thread Starter
Join Date: Apr 2008
Location: Cairo, EGYPT
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Trex250 problem
Hi there,
I'm new to electric helis, I bought the trex 250 super combo and I placed my futaba 7C 2.4 Tx in it, but there is no response and the Tx keeps blinking, when I unpluged the ESC from the the Tx and conected the battery directly to the Tx everything worked fine, also the ESC gets very hot, does that means that the ESC is not working? please help.
I'm new to electric helis, I bought the trex 250 super combo and I placed my futaba 7C 2.4 Tx in it, but there is no response and the Tx keeps blinking, when I unpluged the ESC from the the Tx and conected the battery directly to the Tx everything worked fine, also the ESC gets very hot, does that means that the ESC is not working? please help.
01-20-2009, 08:38 AM
#3
Junior Member
Join Date: Dec 2005
Location: bangkok, THAILAND
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
RE: Trex250 problem
this is problem about BEC function in your ESC.. to make sure this is real.. switch to other ESC if new one work...that is your ESC must need to set BEC voltage to lower ... see manual
01-20-2009, 07:49 PM
#4
Junior Member
Join Date: Dec 2005
Location: bangkok, THAILAND
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
RE: Trex250 problem
visit this page... have many tips and problem solve method
http://www.runryder.com/helicopter/t485986p1/
