dudewheresmycar

my pull start is pulled all the way out on my rs4 mt. how do i get it to start again.when i got this from my family member,it was like this

sheograth

Take it apart and try to re-wind it, otherwise just replace it. Pullstarts can be a pain to fix.

olkleaf

if you do dicide to fix it becareful the spring can fly out and hit you. wont be a bad idea to were safety glass

Brett185

My Feedback: (2)

Man, just buy another one. It ain't worth the trouble. I promise.

jamstar47

i have fixed my pull start lots and lots of times and i even fix all ma friends own. im one os 2 ppl that he knos in jamaica that can fix em soo fast

jamstar47

just take it out and rewind teh spring its not that hard to figure out here is a video to help ya http://www.youtube.com/watch?v=K1_Y2...e=channel_page

DaveG55

Most pull starts can be repaired - unless a part (other than the cord) has broken. They can ba a real PITA to fix though. It's really difficult to explain exactly how to go about it because, while most work on the same basic idea, they can have some differences. Since your's is broken now, take it apart and see if you can figure it out. If your cord is broken I've found that "mini-blind" cord works pretty good as a replacement.

Also, it is a really good idea to keep a spare pull start around so you can just swap it on while you're fixing the other one.