Skylark Tail motor not working Help!!
#1
Member
Thread Starter
Join Date: Apr 2003
Location: Fresno, CA
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Skylark Tail motor not working Help!!
Not too sure what's going on, but all was fine a couple of hours ago, I put the Heli on charge, and i just unplugged the battery from charging, and i started it up and the tail rotor now is not working.
When I apply full right stick the tail rotor turns a hair then no more response, you can hear a buzzing sound from the front end of helicopter, but tail motor is totally dead.
Is there a possibility my gyro went out, or motor bad. I have only had this heli for 3 or 4 days, had a couple of crashes, nothing serious though.
What's going on!!
HELP!!!
Thanks
Anthony
When I apply full right stick the tail rotor turns a hair then no more response, you can hear a buzzing sound from the front end of helicopter, but tail motor is totally dead.
Is there a possibility my gyro went out, or motor bad. I have only had this heli for 3 or 4 days, had a couple of crashes, nothing serious though.
What's going on!!
HELP!!!
Thanks
Anthony
#2
Member
Thread Starter
Join Date: Apr 2003
Location: Fresno, CA
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Tail Rotor Not Running
My tail rotor is not working, no matter where I turn left stick, left or right, it just won't spin unless I flick it with my finger.
What is going on??
Anthony
What is going on??
Anthony
#3
Member
Thread Starter
Join Date: Apr 2003
Location: Fresno, CA
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Left pot on Gyro for what??
I know the right pot adjust tail rotor, but what is the left pot for and how does it affect performance on Skylark?
Thanks
Anthony
Thanks
Anthony