DeLeon79

hey guys...i reached a snag in my fun factor today...

i was driving my Maxx today and i noticed that the truck was slower and the front axles where spinning alot more than the rear...took it in and i found out that i got fishing line all tanggled up on both rear axles...so i cut off all the fishing line and checked to see if anything was loose or broken...NOTHING...everything seemed fine! i spun the wheels...they spun normal...my friend even looked at them he said they're normal...so i started the truck again and now its acting like a FWDcar...WTH?!??? what happened? did i strip gears in the rear diff??? or the tranny??? please help guys! thanks

-Chris</p>

guver

My Feedback: (325)

Follow this trail:

trans output shaft,rear drive shaft,diff,both axle shafts,pins,hex,wheels. I'd bet on the rear diff, but it could be any one of these things.

rangerfredbob

My Feedback: (13)

the trans output shaft is very unlikely, check for a spun rear center shaft, if that is in good order you killed your differential, the spider gears are $9 if I remember right and you might want to look into a kimburgh aluminum diff cup or at least a new stock one as yours is probably fubared...

DeLeon79

<font face="Arial" size="1"><font face="Arial" size="1">

well i took off the center skid plate and found out that the Transmission output yoke for the rear driveshaft came off!!! how...i d k...put i simply replaces it...thanks for all your support!!!

-Chris</p></font></font>

guver

My Feedback: (325)

The yoke is held on with a long allen pin/screw , maybe the pin came screwed out?

DeLeon79

yes well my friend gave me a spare from his revo and it was good as new!!!

and he said something that put a smile on my face and made my day...

"maybe i should of got a T-Maxx..." LoL