waterpump question Rio 51
#1
Senior Member
Thread Starter
Join Date: Mar 2009
Location: selma,
AL
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
waterpump question Rio 51
Hello gang gotta a quick question about a waterpump Just orderd zen 260 with m5 mod from whh with a clutch and waterpump also orderd a wet pipe system my question is if the water is coming out of the pipe wouldent it be hard to tell if the motor is getting enough cooling water I was wondering if you could put a tee in and let some water come out of the side of the boat or would this stave the wet pipe for water thought about putting the tee in after the water leaves the manafould and into the wet pipe any thoughts would be a big help thanks guys..........wild
#2
Senior Member
Join Date: Jan 2008
Location: Conyers, GA
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
RE: waterpump question Rio 51
I thought about that; but you might want to talk to Tony C. ; if memory serves me correctly; the water discharging thru the pipe is what tunes the pipe; might make a difference, might not.
#3
Join Date: Nov 2006
Location: Andover,
NJ
Posts: 367
Likes: 0
Received 0 Likes
on
0 Posts
RE: waterpump question Rio 51
That is correct. The water causes the echo to distort allowing the enging to produce more torque. You actually lose about 20% top end compaired to a dry system.
pyro1
pyro1