any of you guys know what make of hull this is ??
#1
Member
Thread Starter
My Feedback: (-1)
Join Date: May 2008
Location: qld, , AUSTRALIA
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
any of you guys know what make of hull this is ??
hi do any of you guys know what make of hull this is ??
i bought it a while back
just trying to find out what make of hull it is
it looks as though it could be a jet boat from the shape of the hull it is 40 inches long and
thanks guys
i bought it a while back
just trying to find out what make of hull it is
it looks as though it could be a jet boat from the shape of the hull it is 40 inches long and
thanks guys
#2
My Feedback: (3)
RE: any of you guys know what make of hull this is ??
Looks like a jet sprint style hull but it does not look like any of the commercially available hulls I am familiar with.
The flat vee leads me to believe it is for a jet pump. Similar to this swashdrive bottom I imagine - http://imageevent.com/justaddwata/my...=0&w=4&s=0&z=4
The flat vee leads me to believe it is for a jet pump. Similar to this swashdrive bottom I imagine - http://imageevent.com/justaddwata/my...=0&w=4&s=0&z=4
#3
Senior Member
Join Date: Aug 2008
Location: Midland, ON, CANADA
Posts: 666
Likes: 0
Received 0 Likes
on
0 Posts
RE: any of you guys know what make of hull this is ??
Okay two questions Matt.
One, are you planning on starting an RC boat museum? You seem to have a sample of, well, everything including propellers.
Two, are you trying to get me fired? Every time you send out a picture link I spend a half an hour, at the least, on the computer at work gawking. The Miss Geico replica cost me two hours of my life I'll never get back.
Recognized Dasboata, Chris, in one of the pictures. Was he bringing you a new shipment?
One, are you planning on starting an RC boat museum? You seem to have a sample of, well, everything including propellers.
Two, are you trying to get me fired? Every time you send out a picture link I spend a half an hour, at the least, on the computer at work gawking. The Miss Geico replica cost me two hours of my life I'll never get back.
Recognized Dasboata, Chris, in one of the pictures. Was he bringing you a new shipment?
#4
Senior Member
Join Date: Feb 2008
Location: Old Hangtown ,
CA
Posts: 851
Likes: 0
Received 0 Likes
on
0 Posts
RE: any of you guys know what make of hull this is ??
Agree, looks to be a delta keel hull likely design for SQUIRT propulsion ....
And being your in OZ, very likely !!
Check: Swashdrive
And being your in OZ, very likely !!
Check: Swashdrive
#6
Member
Thread Starter
My Feedback: (-1)
Join Date: May 2008
Location: qld, , AUSTRALIA
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
RE: any of you guys know what make of hull this is ??
i also havent seen this shaped hull before but i am familiar with the swashdrive hulls and thought that i was similar to those !!!
oh well i will put it back into storage as i have no use for a jet boat hull !!
any ideas how it would handle with a stinger drive unit on it ??
oh well i will put it back into storage as i have no use for a jet boat hull !!
any ideas how it would handle with a stinger drive unit on it ??
#7
Senior Member
Join Date: Feb 2008
Location: Old Hangtown ,
CA
Posts: 851
Likes: 0
Received 0 Likes
on
0 Posts
RE: any of you guys know what make of hull this is ??
Using GAS power such as a Zenoah 260 or RCMK, if OAL is 45" or better it should work. If stubby like 40" give or take .... Shelve it, it is a squirty [:'(]
#8
Member
Join Date: Aug 2003
Location: brisbane, , AUSTRALIA
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
RE: any of you guys know what make of hull this is ??
Gday All
Definatley not one of my hulls, but looks like someones interpretation of a jetboat !
Heah Matt you wanna hang on to that Swashdrive Jetsprint,
will become very rare oneday as i'm not making these things anyore !
Looks like your keeping it in good nick
Regards
Craig
Definatley not one of my hulls, but looks like someones interpretation of a jetboat !
Heah Matt you wanna hang on to that Swashdrive Jetsprint,
will become very rare oneday as i'm not making these things anyore !
Looks like your keeping it in good nick
Regards
Craig
#9
Join Date: Jan 2007
Location: Perth, AUSTRALIA
Posts: 786
Likes: 0
Received 0 Likes
on
0 Posts
RE: any of you guys know what make of hull this is ??
I would get into the black paint on the inside with a bit of thiners and a rag and see if you can uncover a makers lable???
Steve
Steve
#10
Join Date: Jan 2007
Location: Perth, AUSTRALIA
Posts: 786
Likes: 0
Received 0 Likes
on
0 Posts
RE: any of you guys know what make of hull this is ??
Take a look at this thread, something might look the same.
http://www.rcuniverse.com/forum/m_79..._1/key_/tm.htm
http://www.rcuniverse.com/forum/m_79..._1/key_/tm.htm
#11
Junior Member
Join Date: Jul 2009
Location: cocoa,
FL, US MINOR OUTLYING ISLANDS
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
RE: any of you guys know what make of hull this is ??
Hello their well doll.I can tell you that this is NOTone I built.But it may be a PRATHER. visit the web sight atexpresscraft.com and you can see the boats I build.Hey have a good day