savage one way bearing info needed? please!!!
08-09-2009, 10:58 AM
#1
Junior Member
Thread Starter
Join Date: Feb 2006
Location: conway,
SC
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
savage one way bearing info needed? please!!!
guys i just picked up a savage from a friend of mine. it needs a one way bearing for it but its got collari .32 on it with a hpi roto start on it . do need to order a new bearing for a hpi BB or will any BB bearing work as long as the o.d. matches the roto start?
08-09-2009, 12:43 PM
#2
Senior Member
Join Date: Apr 2009
Location: CHICAGOLAND,
IL
Posts: 1,856
Likes: 0
Received 0 Likes
on
0 Posts
RE: savage one way bearing info needed? please!!!
Did you try cleaning the OWB with carb or brake cleaner?
Or is it trashed?
Also hit the shaft with some steel wool or a 3M pad to take the glaze off.
I have cleaned mine many times with good results.
SLAYER
Or is it trashed?
Also hit the shaft with some steel wool or a 3M pad to take the glaze off.
I have cleaned mine many times with good results.
SLAYER
08-09-2009, 06:27 PM
#5
Junior Member
Thread Starter
Join Date: Feb 2006
Location: conway,
SC
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
RE: savage one way bearing info needed? please!!!
it is outside . I have found out the shaft is a 8mm . so all i need is a 8mm oneway bearing,is that right?
