first paint job
#2
Senior Member
Thread Starter
Join Date: Jul 2009
Location: grain valley, MO
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
RE: first paint job
to this....[img]file:///C:/DOCUME~1/User/LOCALS~1/Temp/moz-screenshot.jpg[/img][img]file:///C:/DOCUME~1/User/LOCALS~1/Temp/moz-screenshot-1.jpg[/img]
#3
Senior Member
Thread Starter
Join Date: Jul 2009
Location: grain valley, MO
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
RE: first paint job
i did this using duplicolor rattle can ( which i was <u>VERY </u> sceptical of ) and then cleared it with duplicolor's "paint shop" clear with metallic in it. This is a pre-mixed clear that you just put into a sprayer and shoot...no thinning. I think it turned out excellent!
EVEN MY WIFE LIKES IT!!!! ( that is odd )
EVEN MY WIFE LIKES IT!!!! ( that is odd )
#4
My Feedback: (3)
RE: first paint job
Came out nice - only challenge with that color - it is going to be hard to see when she stops in the middle of the pond. Ok if your on your own but if there are others running it may be a problem.
Keep the pics coming - very nice work for a rattle can (or spray gun for that matter)
Keep the pics coming - very nice work for a rattle can (or spray gun for that matter)
#9
Senior Member
Join Date: Jun 2006
Location: hartford, CT
Posts: 615
Likes: 0
Received 0 Likes
on
0 Posts
RE: first paint job
The color is not a problem to see as long as you are running the roost will be visible enough for reference. Actually if you are looking at the boat while its running you aren't driving correctly anyway, look to where you want the boat to go, not look at it.
The big issue with a color like that is if its painted that color on the bottom, flips over, other drivers with boats on the water won't seee it and hit it.
The big issue with a color like that is if its painted that color on the bottom, flips over, other drivers with boats on the water won't seee it and hit it.
#10
Senior Member
Thread Starter
Join Date: Jul 2009
Location: grain valley, MO
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
RE: first paint job
i'm not really a racer, unless you call kickin dockman's butt racing...hee hee, but if i do, i plan on using some florecent numbers on the bottom. for the top, i have a buddy that does vinyl graphics and he is chompin at the bit to do something to it!!! i will probably do something in an orange or yellow or both .
thanks for the props y'all
-scott
thanks for the props y'all
-scott
#11
Senior Member
My Feedback: (48)
Join Date: Mar 2003
Location: Gulf Shores, AL
Posts: 1,885
Likes: 0
Received 0 Likes
on
0 Posts
RE: first paint job
Scott, it really looks good. You get a chance to head out this way, I'd appreciate it if you'd show me some tricks. Too the point now that I'm debating vinyl stick on.