F-15 After burner ring
#1
Thread Starter
My Feedback: (21)
F-15 After burner ring
I was messing around with some LED strip lights for the foamies and came up with this for my F-15. They will be conected to a brushed speed control Y of the throttle. As I throttel up they get briter. Here they are hooked up directly to the 3 cell LiPo. Total cost was about 20 bucks for the lights and 20 bucks for the speed control. I think they look pretty good
Joe L.
Joe L.
#3
RE: F-15 After burner ring
Hello:
Looks great !!!
which color are the LEDs ? orange ? can you put any photo for details.
Many thanks.
Carlos
______________________
http://cmjets.blogspot.com/
Looks great !!!
which color are the LEDs ? orange ? can you put any photo for details.
Many thanks.
Carlos
______________________
http://cmjets.blogspot.com/
#4
Thread Starter
My Feedback: (21)
RE: F-15 After burner ring
Very simple actually. The Strip lites are from RC Lazar toys. I used 2 strips in each cone. 1 yellow and one red with the red being closer to the tail end of the cone. and the speed control is a Brushed 10 amp E-flite. If you youi the speed controler, BE SURE to disconnect the positve Wire from the RX connection other wise you WILL feed power from the battery that powers the lites into you RX. The battery is a 3 cell 350 mHa Lipo.
Joe L.
Joe L.
#15
My Feedback: (106)
RE: F-15 After burner ring
Ok Joe, Let us know. Guys here is the link for the lazertoyz strip leds like Joe is using. Dan said he was upgrading the site when I tried to find them and they have a mighty good price on them.
http://lazertoyz.ncweb.net/V4lights.htm
I will be ordering tonight!!! Roy
http://lazertoyz.ncweb.net/V4lights.htm
I will be ordering tonight!!! Roy
#16
Thread Starter
My Feedback: (21)
RE: F-15 After burner ring
Roy
I just finished my test.
With a 350mHa 3 cell Lipo on at full power, the lights just started to dim a bit after 60 minutes. On my F-15 with a 7-1/2 minute timer that would give me about 8 flights.
Hope this haelps and glad to see you found the strips from Dan.
Post your install when you get it done.
Joe L.
I just finished my test.
With a 350mHa 3 cell Lipo on at full power, the lights just started to dim a bit after 60 minutes. On my F-15 with a 7-1/2 minute timer that would give me about 8 flights.
Hope this haelps and glad to see you found the strips from Dan.
Post your install when you get it done.
Joe L.
#19
My Feedback: (106)
RE: F-15 After burner ring
Jetpilot.
I'm putting mine in a JL CT-114. Right now I'm just gathering all of what I need to complete it. The biggest holdup is the turbine. I'v tried to buy one for the last few weeks but out of the sizes I could use, the seller either had two prices on it or no ratings or didn't accept pay-pal and had no ratings!!! ha. A deal in a P-70 or equal size turbine best not show up or I might buy it. Ha. If I give up on the used ones I will prob call Tod or Chad and get a 90. Roy
I'm putting mine in a JL CT-114. Right now I'm just gathering all of what I need to complete it. The biggest holdup is the turbine. I'v tried to buy one for the last few weeks but out of the sizes I could use, the seller either had two prices on it or no ratings or didn't accept pay-pal and had no ratings!!! ha. A deal in a P-70 or equal size turbine best not show up or I might buy it. Ha. If I give up on the used ones I will prob call Tod or Chad and get a 90. Roy