Pulse 60 Spinner
#1
Member
Thread Starter
Join Date: May 2008
Location: dahpne,
AL
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Pulse 60 Spinner
Ihave a Pulse XT60 kit with a Saito 100. The kit is built and ready to go, except the prop doesn't fit with the spinner. Iused the dremmel but it just doesn't seem to fit well with the back plate.
What spinner should Iget that would fit with a Saito 100 with a 14X8 evo prop? Idon't mind spending extra for a good one as long as Iknow it will fit.
Please paste a link if you don't mind.
Thanks!
What spinner should Iget that would fit with a Saito 100 with a 14X8 evo prop? Idon't mind spending extra for a good one as long as Iknow it will fit.
Please paste a link if you don't mind.
Thanks!
#2
Senior Member
Join Date: Mar 2003
Location: Garland, TX
Posts: 6,544
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pulse 60 Spinner
http://www.tru-turn.com will cut a spinner to fit any prop. Find the size you need, and shape you like, on the web site. Then call them on the phone to talk about custom fitting the slots to your prop.