TIPORARE-WHO SELLS SHORT KIT/FOAM WING CORES
#1
Senior Member
Thread Starter
TIPORARE-WHO SELLS SHORT KIT/FOAM WING CORES
A guy at my club who is an old pattern contest flyer mentioned today that he would like to build another Tipo. He said he was going to be looking for plans. I said I would bet someone has a short kit and/or sells the wing cores for it. Any help from you guys would be appreciated. Below is picture of him flying my Atlanta on its first flight(me as its owner). The Atlanta is over twenty years old and now resides near Atlanta with its current owner
#4
My Feedback: (3)
Join Date: Apr 2008
Location: Montreal,
QC, CANADA
Posts: 5,200
Likes: 0
Received 5 Likes
on
5 Posts
RE: TIPORARE-WHO SELLS SHORT KIT/FOAM WING CORES
airbusdrvr,
I have a set of Tipo cores (wings and stab). If you are interested, drop me a PM. I can send you a set of plans with them at no additional cost or you can download them from my thread on the scaled Tipo's and print them yourself:
http://www.rcuniverse.com/forum/m_78..._1/key_/tm.htm
Cheers, David.
I have a set of Tipo cores (wings and stab). If you are interested, drop me a PM. I can send you a set of plans with them at no additional cost or you can download them from my thread on the scaled Tipo's and print them yourself:
http://www.rcuniverse.com/forum/m_78..._1/key_/tm.htm
Cheers, David.
#6
My Feedback: (3)
Join Date: Apr 2008
Location: Montreal,
QC, CANADA
Posts: 5,200
Likes: 0
Received 5 Likes
on
5 Posts
RE: TIPORARE-WHO SELLS SHORT KIT/FOAM WING CORES
airbusdrvr,
No problem. Just thought I'd give you an option but it is probably easier for you to obtain them directly from Don.
However, you might want to download a set of digital plans from the thread if you haven't done so already. I found them helpful for measuring and printing specific sections when scratch building a little Tipo. If you haven't seen that thread, your friend might find something in there of some use:
http://www.rcuniverse.com/forum/m_8858351/tm.htm
David.
No problem. Just thought I'd give you an option but it is probably easier for you to obtain them directly from Don.
However, you might want to download a set of digital plans from the thread if you haven't done so already. I found them helpful for measuring and printing specific sections when scratch building a little Tipo. If you haven't seen that thread, your friend might find something in there of some use:
http://www.rcuniverse.com/forum/m_8858351/tm.htm
David.