Walkera 4#3b problems
#1
Junior Member
Thread Starter
Join Date: Aug 2010
Location: Haugesund, NORWAY
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Walkera 4#3b problems
Hi!
I just got a used Walkera 4#3b with RX2406 reciever, WK-2401 remote and im pretty happy with it.
However there is a few problems i have.
The first thing i noticed was the tail motor sometimes cutting/getting weaker. It usually gets better again after a few seconds but its a little bit irritating.
The second thing i noticed was the heli strafing to the left. I have to take the trimming slider all to the right and the aluminum ring is down on the right side so it should strafe right. I have adjusted the flybar and but it didnt work.
Help?<br type="_moz" />
I just got a used Walkera 4#3b with RX2406 reciever, WK-2401 remote and im pretty happy with it.
However there is a few problems i have.
The first thing i noticed was the tail motor sometimes cutting/getting weaker. It usually gets better again after a few seconds but its a little bit irritating.
The second thing i noticed was the heli strafing to the left. I have to take the trimming slider all to the right and the aluminum ring is down on the right side so it should strafe right. I have adjusted the flybar and but it didnt work.
Help?<br type="_moz" />
#2
My Feedback: (35)
RE: Walkera 4#3b problems
ORIGINAL: hansihe
Hi!
I just got a used Walkera 4#3b with RX2406 reciever, WK-2401 remote and im pretty happy with it.
However there is a few problems i have.
The first thing i noticed was the tail motor sometimes cutting/getting weaker. It usually gets better again after a few seconds but its a little bit irritating.
The second thing i noticed was the heli strafing to the left. I have to take the trimming slider all to the right and the aluminum ring is down on the right side so it should strafe right. I have adjusted the flybar and but it didnt work.
Help?<br type=''_moz'' />
Hi!
I just got a used Walkera 4#3b with RX2406 reciever, WK-2401 remote and im pretty happy with it.
However there is a few problems i have.
The first thing i noticed was the tail motor sometimes cutting/getting weaker. It usually gets better again after a few seconds but its a little bit irritating.
The second thing i noticed was the heli strafing to the left. I have to take the trimming slider all to the right and the aluminum ring is down on the right side so it should strafe right. I have adjusted the flybar and but it didnt work.
Help?<br type=''_moz'' />