nitro chassis ID please
#1
Thread Starter
nitro chassis ID please
found on ebay, and for some reason took pitty on it and bought it.
I think it was a run-away. I dont even know if the motor will be any good.
It may not run. will need a new "AA" holder at the least.
but i also have no idea what brand/model it is.
hope someone can id from the pics.
I think it was a run-away. I dont even know if the motor will be any good.
It may not run. will need a new "AA" holder at the least.
but i also have no idea what brand/model it is.
hope someone can id from the pics.
#2
Thread Starter
RE: nitro chassis ID please
man, its driving me nuts.
i did a google image search and found nothing like this car.
it isnt an exceed or redcat(at least not the current ones they sell.)
i did a google image search and found nothing like this car.
it isnt an exceed or redcat(at least not the current ones they sell.)
#4
Thread Starter
RE: nitro chassis ID please
ORIGINAL: DarkFire989
Might be an HPI RS4. I could be wrong though.
Might be an HPI RS4. I could be wrong though.
some simillarities. but my chassis has an upside-down mounted steering servo. seems a fairly unique feature.
un less its a much older version of the rs4, which is possible. i have no idea the age of it, tho it doesnt look all that old.
#6
Thread Starter
RE: nitro chassis ID please
ORIGINAL: djyjrlz
lloks very much like a CEN of some sort.... not sure but they use purple alot.
lloks very much like a CEN of some sort.... not sure but they use purple alot.
seems its a smartech
http://www.google.com/url?sa=t&sourc...FWB3kjwPaOE7uw
probly means spare parts will be a pain to get. i dont know of anyone who owns a smartech. i think ive seen their 1/5 gassers on ebay, but thats all.
#8
Thread Starter
RE: nitro chassis ID please
its a smartech "winner pro"
still dont know where i could find parts, or how much it will actually need.
good thing i only paid $40 shipped for it.
still dont know where i could find parts, or how much it will actually need.
good thing i only paid $40 shipped for it.
#10
Thread Starter
RE: nitro chassis ID please
the car arrived today.
the body is thrashed, looks like crap. i probly have a body i can put on it tho.
i replaced the bad rx battery box, and put my own 2.4ghz radio and reciver on it.
put full in it, primed the tank, 15 pulls later it fired up.
it was super rich, so i tuned it.
not a very fast car(by todays standards) but its a small motor and it did run very well. didnt stop till the last drop of fuel was gone from the tank.
so, i think i did pretty good for a $40 car!
the body is thrashed, looks like crap. i probly have a body i can put on it tho.
i replaced the bad rx battery box, and put my own 2.4ghz radio and reciver on it.
put full in it, primed the tank, 15 pulls later it fired up.
it was super rich, so i tuned it.
not a very fast car(by todays standards) but its a small motor and it did run very well. didnt stop till the last drop of fuel was gone from the tank.
so, i think i did pretty good for a $40 car!
#11
Join Date: Feb 2007
Location: Owensboro, KY
Posts: 5,527
Likes: 0
Received 0 Likes
on
0 Posts
RE: nitro chassis ID please
ORIGINAL: djyjrlz
i suppose it would be cool as a brushless rally conversion....
i suppose it would be cool as a brushless rally conversion....
I hear people converting RC10 GT's over to brushless rather easy.
#12
Thread Starter
RE: nitro chassis ID please
ORIGINAL: ElectricGuy007
Maybe so...id like to see pictures if he does one. Shouldnt be that hard.
I hear people converting RC10 GT's over to brushless rather easy.
ORIGINAL: djyjrlz
i suppose it would be cool as a brushless rally conversion....
i suppose it would be cool as a brushless rally conversion....
I hear people converting RC10 GT's over to brushless rather easy.
I would have considered it, but since the car runs good i will leave it as-is.
#13
RE: nitro chassis ID please
http://www.gadgetgalaxy.com.au/Winne...re%20Parts.htm
http://www.rcworld.us/smartech_car_p...r_pro_s/56.htm
Looks like you can get parts for it.
#14
Thread Starter
RE: nitro chassis ID please
ORIGINAL: Big Alice
http://www.gadgetgalaxy.com.au/Winne...re%20Parts.htm
http://www.rcworld.us/smartech_car_p...r_pro_s/56.htm
Looks like you can get parts for it.
http://www.gadgetgalaxy.com.au/Winne...re%20Parts.htm
http://www.rcworld.us/smartech_car_p...r_pro_s/56.htm
Looks like you can get parts for it.
i put it up on the RCU marketplace for sale or trade.
if i dont get any good offers i will keep it. just i dont often run nitros i have. I am pretty happy how well the car runs tho. I really dont think it had many tanks run threw the motor!
#15
Thread Starter
RE: nitro chassis ID please
this little car runs shockingly well!
the motor is very easy to start, and takes a tune like nothing.
i have had many used nitros, all of which i ended up trading away cause i could never get them to run right.
but this small .15 motor is a breeze to run.
i did however strip a spur gear today. glad you guys found those links so i could order a new one.
the motor is very easy to start, and takes a tune like nothing.
i have had many used nitros, all of which i ended up trading away cause i could never get them to run right.
but this small .15 motor is a breeze to run.
i did however strip a spur gear today. glad you guys found those links so i could order a new one.