Mini Linear actuators?
#1
Thread Starter
Join Date: Aug 2009
Location: Cape Town, SOUTH AFRICA
Posts: 504
Likes: 0
Received 2 Likes
on
2 Posts
Mini Linear actuators?
Interesting site. Wonder if anybody ever used these in a jet?
Andre
http://www.firgelli.com/products.php?id=40
Andre
http://www.firgelli.com/products.php?id=40
#3
Junior Member
Join Date: Jun 2009
Location: Auburn Hills,
MI
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
RE: Mini Linear actuators?
I am putting 4 100 mm servos into a P2V-Neptune. For those unfamiliar, it was a sub hunter and has 2 internal combustion engines inboard, and two turbines outboard. I am putting in 2 ASP 91s and 2 JetCat P20s. The flaps are rather unique and partly my design - aluminum rails and slots operating with a 12" radius curve. They're just like the full size aircraft's Fowler flaps and the Firgelli servos work just fine. I only have part of the wing built, but when the thing is more complete and working I'll post build pics on the short kit suppliers website (http://www.techlazer.com).
Phil Martin
Phil Martin
#4
Thread Starter
Join Date: Aug 2009
Location: Cape Town, SOUTH AFRICA
Posts: 504
Likes: 0
Received 2 Likes
on
2 Posts
RE: Mini Linear actuators?
ORIGINAL: drpdmartin
I am putting 4 100 mm servos into a P2V-Neptune. For those unfamiliar, it was a sub hunter and has 2 internal combustion engines inboard, and two turbines outboard. I am putting in 2 ASP 91s and 2 JetCat P20s. The flaps are rather unique and partly my design - aluminum rails and slots operating with a 12" radius curve. They're just like the full size aircraft's Fowler flaps and the Firgelli servos work just fine. I only have part of the wing built, but when the thing is more complete and working I'll post build pics on the short kit suppliers website (http://www.techlazer.com).
Phil Martin
I am putting 4 100 mm servos into a P2V-Neptune. For those unfamiliar, it was a sub hunter and has 2 internal combustion engines inboard, and two turbines outboard. I am putting in 2 ASP 91s and 2 JetCat P20s. The flaps are rather unique and partly my design - aluminum rails and slots operating with a 12" radius curve. They're just like the full size aircraft's Fowler flaps and the Firgelli servos work just fine. I only have part of the wing built, but when the thing is more complete and working I'll post build pics on the short kit suppliers website (http://www.techlazer.com).
Phil Martin
Andre
#5
Senior Member
Join Date: May 2002
Location: Cornelius,
OR
Posts: 624
Likes: 0
Received 0 Likes
on
0 Posts
RE: Mini Linear actuators?
Many years ago this was the first type of servo, we had several crashes because the servo when jammed was jammed in both directions.
Darryl
Darryl