Jet Central's New Advance ECU and Products for 2016
#1
Thread Starter
My Feedback: (21)
Join Date: Apr 2002
Location: Palm Bay ,
FL
Posts: 383
Likes: 0
Received 0 Likes
on
0 Posts
Jet Central's New Advance ECU and Products for 2016
We are extremely proud to announce Jet Central's new product line for this 2016 season.
The first and most important news is our own new turbine electronic control system (ECU).
We have invested a lot of time to develop this unique and most advanced and only self adjusting ECU System on the market. This new system will put Jet Central ahead of any other turbine manufacturer on the market with many new and very exciting features.
Please see our new banner as this will show all the highlights and new things that our turbines will be able to do.
As we are aware that you or some of your customers may have questions about this new system and as always we welcome any questions that you or any of our customers will have. We are always available via e mail and phone with Jose Melendez in the USA and Juan Ramon Ruiz at the main office to answer any of your questions. Please see contact information below for Jose and Juan:
Jose Melendez. Juan Ramon Ruiz.
Email:[email protected] Email: [email protected]
Phone:321-412-3078. Tel. +52 (55) 5090 7477
Address for any service in the USA Fax.. +52 (55) 5090 7161
231 Anthony Ave SE
Palm Bay Florida 32909
From now on all our turbine production will have this new and very exciting system with our new designation letters SE (SMART ELECTRONICS)
Along with our new system we are also very proud to announce that our Cheetah SP which was a 140 (34lbs of thrust) will now be the CHEETAH 160 (36lbs of thrust) the best news is that we have accomplished this by keeping the same dimensions and weight as the Cheetah 140, but with 160 Newton's of thrust (36lbs).
Last, but not at the very least is the new BEE 80 (18lbs of thrust) again we have accomplished more thrust while being able to keep the same size and weight of the BEE II, (BEE 50). this will give the customers a bigger range of jets for the BEE.
We greatly appreciate and thank you in advanced for all your support and we will promise to continue providing the best in customer service.
Yours truly
Jet Central Management
The first and most important news is our own new turbine electronic control system (ECU).
We have invested a lot of time to develop this unique and most advanced and only self adjusting ECU System on the market. This new system will put Jet Central ahead of any other turbine manufacturer on the market with many new and very exciting features.
Please see our new banner as this will show all the highlights and new things that our turbines will be able to do.
As we are aware that you or some of your customers may have questions about this new system and as always we welcome any questions that you or any of our customers will have. We are always available via e mail and phone with Jose Melendez in the USA and Juan Ramon Ruiz at the main office to answer any of your questions. Please see contact information below for Jose and Juan:
Jose Melendez. Juan Ramon Ruiz.
Email:[email protected] Email: [email protected]
Phone:321-412-3078. Tel. +52 (55) 5090 7477
Address for any service in the USA Fax.. +52 (55) 5090 7161
231 Anthony Ave SE
Palm Bay Florida 32909
From now on all our turbine production will have this new and very exciting system with our new designation letters SE (SMART ELECTRONICS)
Along with our new system we are also very proud to announce that our Cheetah SP which was a 140 (34lbs of thrust) will now be the CHEETAH 160 (36lbs of thrust) the best news is that we have accomplished this by keeping the same dimensions and weight as the Cheetah 140, but with 160 Newton's of thrust (36lbs).
Last, but not at the very least is the new BEE 80 (18lbs of thrust) again we have accomplished more thrust while being able to keep the same size and weight of the BEE II, (BEE 50). this will give the customers a bigger range of jets for the BEE.
We greatly appreciate and thank you in advanced for all your support and we will promise to continue providing the best in customer service.
Yours truly
Jet Central Management
#5
Join Date: Nov 2003
Location: Mexico CityD.F., MEXICO
Posts: 253
Likes: 0
Received 6 Likes
on
4 Posts
Hello Tom
Availability;
About electronic control system, all of our turbines already have it
The Cheetah ; already available but first batch is going fast, next batch in about 2 weeks
Bee 80; available at Florida Jets
Prices are the same that previous turbines, check your dealers for prices
Availability;
About electronic control system, all of our turbines already have it
The Cheetah ; already available but first batch is going fast, next batch in about 2 weeks
Bee 80; available at Florida Jets
Prices are the same that previous turbines, check your dealers for prices
#7
Join Date: Jul 2007
Location: Frederick, MD
Posts: 615
Likes: 0
Received 0 Likes
on
0 Posts
Juan, I believe mine is the version just before the SP turbines but does come with the Powerpack/ECU. Does mine qualify for an upgrade?
#8
Join Date: Nov 2003
Location: Mexico CityD.F., MEXICO
Posts: 253
Likes: 0
Received 6 Likes
on
4 Posts
Yes, any turbine with PowerPack can be upgraded to the new Electronics, no matter if it is SP or not
Turbines with this new electronics will have the denomination SE, (smart electronic)
Just to clarify, Only electronics can be updated, transforming it to a 160 is not possible because it is a complete new development with different interior parts
Regards
#9
Join Date: Jul 2007
Location: Frederick, MD
Posts: 615
Likes: 0
Received 0 Likes
on
0 Posts
Hello RonTins
Yes, any turbine with PowerPack can be upgraded to the new Electronics, no matter if it is SP or not
Turbines with this new electronics will have the denomination SE, (smart electronic)
Just to clarify, Only electronics can be updated, transforming it to a 160 is not possible because it is a complete new development with different interior parts
Regards
Yes, any turbine with PowerPack can be upgraded to the new Electronics, no matter if it is SP or not
Turbines with this new electronics will have the denomination SE, (smart electronic)
Just to clarify, Only electronics can be updated, transforming it to a 160 is not possible because it is a complete new development with different interior parts
Regards
Thanks for the response. Just to point out, my turbine is the Rhino 160, just before it became the Rhino 200. Its never been run since it was purchased back in April of 2014.
Last edited by RonTins; 01-27-2016 at 03:38 PM. Reason: Correct sentence.
#11
Join Date: Jul 2007
Location: Frederick, MD
Posts: 615
Likes: 0
Received 0 Likes
on
0 Posts
#20
My Feedback: (47)
Join Date: Dec 2002
Location: Saint Johns, Florida
Posts: 514
Likes: 0
Received 0 Likes
on
0 Posts
What about telemetry for JR's DMSS Protocol? Is this new self adjusting system using barometric sensing? This technology also exists in Jetcat's RXi line. ECU senses barometric pressure and adjusts fuel ramp accel and other parameters for altitude and such automatically. I'm not a JetCat Rep by the way, I just seen that the add states that its the only one on the market. Is there something different? Just requesting clarification for consumers and myself. I like this new tech.
Thanks guys!
#21
Thread Starter
My Feedback: (21)
Join Date: Apr 2002
Location: Palm Bay ,
FL
Posts: 383
Likes: 0
Received 0 Likes
on
0 Posts
Hello Juan
What about telemetry for JR's DMSS Protocol? Is this new self adjusting system using barometric sensing? This technology also exists in Jetcat's RXi line. ECU senses barometric pressure and adjusts fuel ramp accel and other parameters for altitude and such automatically. I'm not a JetCat Rep by the way, I just seen that the add states that its the only one on the market. Is there something different? Just requesting clarification for consumers and myself. I like this new tech.
Thanks guys!
What about telemetry for JR's DMSS Protocol? Is this new self adjusting system using barometric sensing? This technology also exists in Jetcat's RXi line. ECU senses barometric pressure and adjusts fuel ramp accel and other parameters for altitude and such automatically. I'm not a JetCat Rep by the way, I just seen that the add states that its the only one on the market. Is there something different? Just requesting clarification for consumers and myself. I like this new tech.
Thanks guys!
We will be working with all the major radio brands to get the telemetry to working on all of them but as you know it's also a process to get them all.
As for the new ECU yes we have where you can select your altitude as well as the ECU will self adjust the acceleration. PW will also self adjust so no more of the pump limit reach, better telemetry features and most important much more user friendly.
#22
Join Date: Nov 2003
Location: Mexico CityD.F., MEXICO
Posts: 253
Likes: 0
Received 6 Likes
on
4 Posts
Hello Juan
What about telemetry for JR's DMSS Protocol? Is this new self adjusting system using barometric sensing? This technology also exists in Jetcat's RXi line. ECU senses barometric pressure and adjusts fuel ramp accel and other parameters for altitude and such automatically. I'm not a JetCat Rep by the way, I just seen that the add states that its the only one on the market. Is there something different? Just requesting clarification for consumers and myself. I like this new tech.
Thanks guys!
What about telemetry for JR's DMSS Protocol? Is this new self adjusting system using barometric sensing? This technology also exists in Jetcat's RXi line. ECU senses barometric pressure and adjusts fuel ramp accel and other parameters for altitude and such automatically. I'm not a JetCat Rep by the way, I just seen that the add states that its the only one on the market. Is there something different? Just requesting clarification for consumers and myself. I like this new tech.
Thanks guys!
As Jose told you, we are working with radio manufacturers and we will work with JR as well, the times will depend more of the radio manufacturers than with us
The Self adjusting is for the general operation of the turbine, an altitude range has to be set by the customer
However, a display of a barometric altitude and ambient temperature is displayed along with the expected performance of the turbine (any turbine btw) at does conditions
here is the screen were all these is displayed
An please exuse my spanglish
Last edited by jetmon; 02-02-2016 at 04:38 PM.
#24
My Feedback: (44)
I have been editing the manual for a few weeks now and I can tell you the more I use then new Jet Central designed SE electronics and the new Color Graphic HDT the more I like it!
It is much more responsive and user friendly then than the original ECU / HDT. For example the Transmitter learn function is done in two steps, the color graphical display is truly a diagnostic tool as you can track the exact transmitter stick movements to verify proper operation, and setting up and verifying the fail safe is a no-brainier!
The micro SD slot on the power pack allows for easy download of the Black Box data, and if needed you can download the entire parameter setup and e-mail to Jet Central for analysis; if you are having a particular running issue. The technicians at Jet Central can e-mail a modified parameter file back in which can be uploaded via the microSD card.
Congratulations to the Jet Central Team for introducing the new revolutionary SE Electronics, and I know there will be more features added as time goes on!
I can't wait for the telemetry interface for my Jeti DS-16 radio and some of the other exciting features that will be released in the future!
It is much more responsive and user friendly then than the original ECU / HDT. For example the Transmitter learn function is done in two steps, the color graphical display is truly a diagnostic tool as you can track the exact transmitter stick movements to verify proper operation, and setting up and verifying the fail safe is a no-brainier!
The micro SD slot on the power pack allows for easy download of the Black Box data, and if needed you can download the entire parameter setup and e-mail to Jet Central for analysis; if you are having a particular running issue. The technicians at Jet Central can e-mail a modified parameter file back in which can be uploaded via the microSD card.
Congratulations to the Jet Central Team for introducing the new revolutionary SE Electronics, and I know there will be more features added as time goes on!
I can't wait for the telemetry interface for my Jeti DS-16 radio and some of the other exciting features that will be released in the future!
#25
Cant wait till telemetry is just standard across the board from radios to turbines. I also think increasing output from a smaller motor is nice as well, with all this FAA stuff the larger 55+ lbs jets may start to go away since its such a pain to get it certified.