Sacman3

Looking for a manual on this airframe or at least a cg location. Im hoping someone can help me out!

Thanks
Aaron

vbortone

My Feedback: (2)

Do you fly 3D, Sport, or IMAC? Usually manuals tends to give 3D settings. This is general statement. For IMAC you want to be around 25%-30% MAC. I got an spreadsheet to estimate the CG if you want to do the estimates.

Sacman3

This is a airframe I got from a friend with no manual. I just need a CG to get it airborne safely and ill adjust from there. I just don't want it taking off tail heavy and becoming unflyable. I was just going to CG it at the front of the wing tube and hope for the best.

vbortone

My Feedback: (2)

The problem is that not necesarily the wing tube is the best reference. I would agree that in general could be used.

Sacman3

The CG calculator says that is close, i just dont have a definite answer as to where it should be. The front of the wing tube is roughly 25-33% of the cord

vbortone

My Feedback: (2)

OK. Looks like you should be fine using that CG.